These forums are read only, please use our new forums here.

Main :: Line 6 X2 Digital Wireless



pin out for a mic on a 3.5 conn to xdt1
by billchk on 2012-01-31 21:03:09

been trying to use a dpa 4061 on xdt1 by using a dpa 6034 microdot to 3.5 adapter----dpa says it works-------no go----------the adapter is tip + hot------ring and shiled joined and connected -cold--------------------i come out of the x2 receiver with a standard unbalanced cable-------into the line in of the mixer-------so---can i get it to work-----------if yes tell me the pinout to a 3.5---the 4060 mic is two wire------------and possibly--am i connecting the output correctly with the unbalanced cable into the line input ??



Re: pin out for a mic on a 3.5 conn to xdt1
by Kneehow on 2012-02-01 11:29:31

XDT1 Transmitters didn't power any Phantom Power... perhaps that is the root cause of your particular issue? Only the XDT4's (they were a part of the XDR-95 rack-mount systems) had the ability to provide Phantom Power to mics.




The information above may not be current, and you should direct questions to the current forum or review the manual.