These forums are read only, please use our new forums here.

Main :: POD Farm / POD Studio / TonePort



Authorization issue.
by RyanCacophony on 2012-03-19 21:15:38

Hi, I own a UX2 and a Guitarport.  I use my UX2 on my desktop for recording and such.  I hadly use my guitar port anymore.

My laptop, on the other hand, I use for playing live shows (DJ'd).  I use a different audio card (nio 2|4) for that, and I'd like to use the input from that to go to podfarm.

However, line 6 license manager claims I have too many computers authorized.  I only have one computer authorized (desktop), and my UX2 authorized.  I'd really like to use pod farm on my laptop so I can travel with it, but use an alternate device (I dont have enough USB ports to use the toneport).

From my devices page:

"

You currently are using 2 out of 4 active devices.


You currently are using 4 out of 10 lifetime devices."

Seems like I should be able to authorize my laptop



Re: Authorization issue.
by Line6Don on 2012-03-23 11:19:55

After reviewing your current authorized devices, all appears to be normal and in working order. It appears that you have two computers (both windows 7), a UX2, and a GuitarPort. These four devices are the 4 that are indicated under your lifetime devices. Your 2 currently authorized devices are the  UX2 and one of the Windows 7 computers.

The POD Farm 2 license that you have is factory installed into the UX2 hardware itself. Therefore in order to authorize the use of POD Farm 2, you will need to have the UX2 connected to your computers USB port as a dongle key to authorize POD Farm 2.

In order to authorize your laptop to use POD Farm 2 without the UX2 connected you will need to purchase a POD Farm 2 computer license from our online shop at the link below:

http://line6.com/store/podfarm/computer">http://line6.com/store/podfarm/computer">http://line6.com/store/podfarm/computer




The information above may not be current, and you should direct questions to the current forum or review the manual.