These forums are read only, please use our new forums here.

Main :: POD 2.0, PODxt Family, Pocket POD, FloorPODs



POD Studio UX1 and POD Farm 2,51 - no input signal.
by asdf9876 on 2012-03-23 08:21:54

I don't get a single sound from my POD Farm 2.51. (it doesn't get any signal from UX1)

UX1 is set as a default sound device.

There is a green light on UX1 when plugged.

No messages from Pod Farm.

Guitar and cable are fine.

I'm using WIndows 7



Re: POD Studio UX1 and POD Farm 2,51 - no input signal.
by Triryche on 2012-03-23 08:39:02

How are you trying to monitor the sound?

You need to plug your monitoring solution (headphones/amp/studio monitors) directly into the UX1.

Here is a helpful vid

http://line6.com/support/docs/DOC-2077

">http://line6.com/support/docs/DOC-2077">http://line6.com/support/docs/DOC-2077



Re: POD Studio UX1 and POD Farm 2,51 - no input signal.
by asdf9876 on 2012-03-23 11:37:11

I use headphones plugged into UX1.



Re: POD Studio UX1 and POD Farm 2,51 - no input signal.
by Triryche on 2012-03-23 11:39:48

Have selected your Input from the drop-down in Pod Farm 2.5 in the mixer view?



Re: POD Studio UX1 and POD Farm 2,51 - no input signal.
by asdf9876 on 2012-03-24 08:35:58

Yup. None is working... POD Farm doesn't get any signal from UX1...



Re: POD Studio UX1 and POD Farm 2,51 - no input signal.
by asdf9876 on 2012-03-26 14:34:57

Any other ideas? Maybe someone from Line 6?



Re: POD Studio UX1 and POD Farm 2,51 - no input signal.
by Mr_Arkadin on 2012-03-26 16:51:50

As you haven't marked this as a question when you posted it will most likely not be seen by a Line 6 rep. Your best bet is to repost in this forum instead:

http://line6.com/support/community/support/computer_based/pod_farm_pod_studio_toneport?view=discussions

marking">http://line6.com/support/community/support/computer_based/pod_farm_pod_studio_toneport?view=discussions">http://line6.com/support/community/support/computer_based/pod_farm_pod_studio_toneport?view=discussions

markingyour thread as question before you post.




The information above may not be current, and you should direct questions to the current forum or review the manual.