These forums are read only, please use our new forums here.

Main :: M5 / M9 / M13



M5 effects not working in fx loop
by engiblogger on 2012-04-03 05:51:52

Some effects, such as the growler dont work in my amp's fx loop. how can I set up the M5 to expect hotter signals? I use a peavey VK212



Re: M5 effects not working in fx loop
by phil_m on 2012-04-03 06:10:59

There's not really anything you can do on the M5 itself. Like the vast majority of stompboxes, It has instrument level ins and outs. So if the signal it's getting from your amp's effects send is too hot, you either need to try to reduce the level of that signal somewhat by lowering the preamp level of the amp or investing in something like this.

The Growler effect, along with a few of the other filter models, is very sensitive to the input level, particularly the attack. I've found that to get that even to use that effect to its full capacity in front of an amp, I have to roll back my guitar volume.




The information above may not be current, and you should direct questions to the current forum or review the manual.