These forums are read only, please use our new forums here.
Support forums for all POD HD products
POD HD Pro sample rate?
on 2012-04-12 06:29:38
Does anyone know what the POD HD Pro's sample rate is? I'm trying to run my POD into my interface via the S/PDIF out of the POD, to a converter, and then into the optical in on my interface. My interface is requesting the sample rate of the hardware. Also, does anyone else use their POD in this manner? I could use some pointers. Thanks
Re: POD HD Pro sample rate?
on 2012-04-12 06:52:55
The sample rate is adjustable inside the pod from 44.1kHz up to 96 kHz.
To do this hold the view button to go inside the system configuration and go to the S/PDIF page.
All you have to do is to find a common value with your other device. The higher the value the higher the possible transmitted frequencies and quality, but also the more memory and cpu required while recording.
Bit depth is at 24 bit.
Set your pod as master for best clock synchonization results.
The information above may not be current, and you should direct questions to the current forum or review the manual.