These forums are read only, please use our new forums here.

Main :: POD HD


Support forums for all POD HD products


POD HD 500 unexisting ON/OFF switch
by fechart on 2012-06-02 17:49:48

Hi there,

Is there a way to turn on/off the POD HD 500 without plugging/unplugging the AC Power?

Thanks!



Re: POD HD 500 unexisting ON/OFF switch
by silverhead on 2012-06-02 18:04:29

No there's not. But there are different ways to turn the power on/off. I use a surge-protected  power bar with an on/off switch. My HD500 is connected to the power bar, as is my PA system and mixer, with a copule of spaces left for any other gear I might connect from time to time. Everything goes on/off at once using the power bar switch, protecting the fragile power connector on the HD500.



Re: POD HD 500 unexisting ON/OFF switch
by fechart on 2012-06-02 18:07:58

Thanks silverhead! Good advice!



Re: POD HD 500 unexisting ON/OFF switch
by MerlinFL on 2012-06-02 22:03:11

How about this 0.39 electrical on/off switch that I use for my POD HD500?

on-off_switch.jpg



Re: POD HD 500 unexisting ON/OFF switch
by radatats on 2013-02-14 15:47:07

Check out this idea i made for my HD500 to protect all the connectors and make it easy to turn on and off.

http://line6.com/support/message/410751#410751

">http://line6.com/support/message/410751#410751">http://line6.com/support/message/410751#410751



Re: POD HD 500 unexisting ON/OFF switch
by bjnette on 2013-02-19 01:13:30

I can see why there isn't one on the unit.

Those are great ideas for an on/off switch on the PSU




The information above may not be current, and you should direct questions to the current forum or review the manual.