These forums are read only, please use our new forums here.
Flextone III firmware version 1.0 restoration problem
on 2012-06-07 10:39:01
I had a customer bring me his Flextone-III amp for restoration of the original version 1.00 firmware. The firmware restoration appeared to run smoothly without errors, but now he has notified me that Bank #1 was not restored. Are there any troubleshooting steps that can be performed, or do we simply have to re-download the version 1.00 firmware file and perform another restoration to his amp?
More details: He brought a backup CD-ROM that had been made when the upgrade from 1.00 to 1.10 was done. I tried to restore his original settings from the bundle file on the CD-ROM but received errors that it was not usable. Next I downloaded the Version 1.00 firmware from the Line-6 website. I used version 1.50 of Line-6 Monkey to transfer the downloaded firmware 1.00 file to his Flextone-III amp. I am running a Windows-7 Pro laptop and a Turtle Beach 1.1 USB-to-MIDI adapter to communicate with his amp.
Any assistance would be greatly appreciated.
Re: Flextone III firmware version 1.0 restoration problem
on 2012-06-08 10:23:13
You might want to try to reset the amp. Hold the A and D buttons down for 8 seconds while powering up the amp.
The information above may not be current, and you should direct questions to the current forum or review the manual.