These forums are read only, please use our new forums here.
Support forums for all POD HD products
HD Pro Master Volume
on 2012-06-15 11:02:10.8140
Did a quick search and can't find this asked so here goes!
I've gotten very used to using the master volume options on my x3 live (xlr out to house is fixed, master volume knob only affects my stage volume / 1/4 outs)
Is there no way to change the bahavior of the master volume on the HD Pro?
Seems like this should be a no-brainer considering both live or in the studio it's rare 2 items would need the same output signal level.
Thanks for reading and or answering if you know!
Brodie Stewart Band // visionguitar.com
(ok after posting, the related articles on the side showed someone addressing this question for the hd 500. For those who couldn't find it either, the answer is no sadly.)
My 2c is the master volume is useless as it stands. I have to tape / mark the spot where the master volume clips most mixer inputs so I don't go past that and just had to get a volume in the chain after the HD Pro and before the speaker cab.
Please fix this Line 6. Thanks for reading.
Re: HD Pro Master Volume
on 2012-11-09 15:15:00.4300
I second this. If it's possible through firmware, please implement.
The information above may not be current, and you should direct questions to the current forum or review the manual.