These forums are read only, please use our new forums here.

Main :: FBV MkI / MkII Controllers



Fbv MK1 Issue
by XiphosFTW on 2012-06-19 21:06:37

So I just recently got one of the older FBV Express models but, the thing is it doesn't seem to be working. I plug it in and it lights up, but pressing any of the footswitches does nothing. When I try to calibrate it I hold A and D until the lights go out and and when I press the toe switch on the wah/volume pedal the wah light never comes on, the volume light does.

I'm using a Spider Valve 212 (the older model)

Any help will be very appreciated. Thanks!



Re: Fbv MK1 Issue
by fflbrgst on 2012-06-20 05:41:43

The first thing to check is the CAT5 cable and/or the plugs/jacks.  Often there are bent pins in the jacks, or the cable has a broken conductor.



Re: Fbv MK1 Issue
by XiphosFTW on 2012-06-20 17:54:14

I've tried 2 different cables and there doesn't seem to be anything wrong with the jack itself




The information above may not be current, and you should direct questions to the current forum or review the manual.