These forums are read only, please use our new forums here.

Main :: M5 / M9 / M13



M13 and Orange Dual terror no Fxloop,
by Giax1974 on 2012-07-02 11:53:29

Hi, I just got a Orange lunchbox,  a Dual Terror, and It doesn't come with a effect loop,
I am used to routing everything via 4CM, but I got this portable amp because I loved it sound and portability, but the lack of FXloop is complicating my relashioship with effects.
Which way would be the recomended to connect the M13 with various pedals?

I wanted to put first my Tunner, then POG and Distortions, and was thinking on place it right after the dirt boxes, and after the M13 a analogue delay.

Is this correct placement?

Also, what is recommended to when using delays and effects with no FXloop?

I have to put everything on pre-all? on the M13 now that I dont have the FXloop? Right...

Thanks in advanced!



Re: M13 and Orange Dual terror no Fxloop,
by Giax1974 on 2012-07-04 19:57:35

Any ideas?



Re: M13 and Orange Dual terror no Fxloop,
by phil_m on 2012-07-05 06:08:44

Putting the M13 in front of the amp is the only thing you can do. I don't know if those amps can be modified to have an effects loop added or not, but that would be the only way you could use the 4CM with it.



Re: M13 and Orange Dual terror no Fxloop,
by Giax1974 on 2012-07-10 06:45:22

I am not going to use the 4CM, I want to know if M13 should be before or after my dirt pedal in an amp with no FXloop with a nice crunch channel?

I see a lot of people put it first, but from my point of view if I put it first, dealys will go before my external dirt pedals.

But I still see a lotsssss of people putting the M13 first... the guitar>M13>pedals...



Re: M13 and Orange Dual terror no Fxloop,
by phil_m on 2012-07-10 07:37:48

You'd most likely want to put your distortion before the M13 or in the M13's loop. It's really up to you, but, yes, distortion after delay generally sound like crap.



Re: M13 and Orange Dual terror no Fxloop,
by Giax1974 on 2012-07-17 08:29:57

Solved this way and it sounded great!

GTR>tunner>Compressor>OD>m13(FX1)>M13 FXLoop (FUZZ>POG2)>M13 (FX2,3,4)>MemoryMan> AMP

In this way I will use my OD/Distortion to push the amp, and when M13 loop footswitch active it will turn on my fuzz and pog.




The information above may not be current, and you should direct questions to the current forum or review the manual.