These forums are read only, please use our new forums here.

Main :: Relay Digital Wireless



G50 Signal Output Causing Distortion
by bmxpunk2315 on 2012-07-03 00:03:32

I need an idea or help getting the output on my g50 quieter. I run it into a TC Electronic Nova System and with input gain on absolute minimum its clipping the input. Any ideas on how to fix this? Right now I put a Fishman Platinum DI before the Nova System and it works, but I need that at the end of my chain as a DI box for my acoustic setup. Any help would be greatly appreciated.



Re: G50 Signal Output Causing Distortion
by dboomer on 2012-07-03 08:53:34

There is no gain in the output of any Relay systems.  You get out what you put in, so the simple answer is turn down at the input.

The basic rule of thumb for avoiding noise is to run as loudly as you can but without driving an input to clipping.  If you were to turn down the output of the G50 it would become more noisy.  What you want to do is increase the input sensitivity of your Nova system.  That should also lower the noise in the Nova system.




The information above may not be current, and you should direct questions to the current forum or review the manual.