These forums are read only, please use our new forums here.

Main :: JM4 Looper



Using Acoustic Guitar with the JM4
by jpburcham on 2012-09-10 13:58:12

I looked everywhere for the answer to this, sorry, I couldn't find it.

I'm playing a Taylor 414ce acoustic guitar. Would it be better to use the mic input on the JM4, or is there a Amp Setting that will work with an acoustic guitar?

The Taylor has XLR output straight from the guitar, but also will use the 1/4" TR cable.

If using the Mic input, am I able to get reverb and possibly chorus or delay in the effects train?

Thanks in advance.

Joe



Re: Using Acoustic Guitar with the JM4
by tejasbullet on 2012-10-06 18:06:10

Which input sounds best to you?  The answer is as simple as that. 

I was advised to use the Aux input for my acoustics because the Guitar input was going to sound like S**t.  I originally did plug into the Aux and it was okay, but then I plugged into the Guitar input and it was also okay. 

One of my acoustic guitars also has the direct XLR out, but I haven't bothered to try it as an input to the JM4.  Biggest reason for not trying the XLR is that I don't need to- the other two inputs get the job done sufficiently.  Second reason is I use the mic input for a mic.




The information above may not be current, and you should direct questions to the current forum or review the manual.