These forums are read only, please use our new forums here.

Main :: DT50/DT25



DT 50 Firmware update
by michaelmortimer on 2012-10-21 07:21:15

I am going to try this later today but i thought seek some input from my friends in this community. I have a HD 500 and a DT 50 1x12 combo. My question is has anyone here done the amp update using there hd devise as the midi interface? Wondering if it is possible? I dont want to buy an interface just for an update.



Re: DT 50 Firmware update
by TheRealZap on 2012-10-21 07:37:20

you have to buy and use a midi interface to update the amp . I highly recommend that you get an m-audio uno rather than a generic midi/usb adapter.

the generic ones sometimes work... but i wouldn't risk it if your intent is to update the firmware.



Re: DT 50 Firmware update
by michaelmortimer on 2012-10-21 08:01:23

TRZ

That looks perfect for the application.

Thanx for the advise.

Best

MGM



Re: DT 50 Firmware update
by Netfly on 2012-10-21 09:06:11

Hi,

This is what you are talking about? Sorry, I'm a total newbie

http://www.m-audio.com/products/en_us/Uno.html

I">http://www.m-audio.com/products/en_us/Uno.html">http://www.m-audio.com/products/en_us/Uno.html

Ipurchased a DT25 some months ago and I wonder if it's necessary to update it now. I can't find any announcement about a new firmware for the DT series.

Also, there is no video to explain the connectivity process for the update?

Thx in advance



Re: DT 50 Firmware update
by TheRealZap on 2012-10-21 09:35:07

there isn't any new updates.... but that is the right interface you linked to.



Re: DT 50 Firmware update
by evilmikehoo on 2012-10-21 10:46:00

That's what I use and it works fine. My DT50 needed the latest update when I got it about a month ago.



Re: DT 50 Firmware update
by TheRealZap on 2012-10-21 11:40:28

here's the instructions you asked for, no video that i know of.

http://line6.com/support/docs/DOC-2746



Re: DT 50 Firmware update
by TheRealZap on 2012-10-30 13:43:25

hope you got that cable!

new update out today: line6.com/dtv2update/



Re: DT 50 Firmware update
by Crusty_Old_Rocker on 2012-10-30 13:51:42

I have been using an iPod Touch with the MIDI Mobilzer and Touch OSC software to control the DT amps for quite some time now.

Cheers,

Crusty



Re: DT 50 Firmware update
by TheRealZap on 2012-10-30 13:54:52

Crusty_Old_Rocker wrote:

I have been using an iPod Touch with the MIDI Mobilzer and Touch OSC software to control the DT amps for quite some time now.

Cheers,

Crusty

and it's AWESOME



Re: DT 50 Firmware update
by spikey on 2012-10-30 15:25:59

I was asked once just what in the heck I thought the DT series amps needed for an update!?!?!...

What’s New?

  • 12ax7 Normal/Boost Amp Default Reversed –FIXED

  • Configure each Voicing independently per channel with*:
    • Any 1 of 30 HD Preamps/Tonestacks
    • Any 1 of 4 Negative Feedback Loop configurations
    • 12ax7 Normal or Boost
    • Feedback Capacitor Tight or Loose
    • Phase Inverter B+ Voltage High or Low
    • Any 1 of 17 Cabinets
    • Any 1 of 12 Reverbs with unique Decay, Pre-Delay, and Tone settings
  • Configure XLR Direct Output Mic Emulation

  • Reverb “spillover” between Channel A and B

Perhaps a few things like this?     Nice work Line 6 !



Re: DT 50 Firmware update
by mike-w on 2012-12-03 20:53:32

I'm trying to update through the midi ports on my X3L and I'm not getting anywhere.  Do I need an interface as advised in this thread?



Re: DT 50 Firmware update
by TheRealZap on 2012-12-04 05:01:03

mike-w wrote:

I'm trying to update through the midi ports on my X3L and I'm not getting anywhere.  Do I need an interface as advised in this thread?

yes you need an interface... you cannot upgrade through any sort of pod...




The information above may not be current, and you should direct questions to the current forum or review the manual.