These forums are read only, please use our new forums here.

Main :: POD HD


Support forums for all POD HD products


Finally have dry guitar out working! Which input should I use?
by chimp_spanner on 2012-11-19 09:23:53

Hey all! Just picked up the Behringer HD400 hum isolator and now have the dry guitar output on the HD Pro working perfectly with no high pitched whine or hum Now I'm curious as to which input I should connect it to? Plugged into the Line Input of my ProFire 610 it's pretty quiet (I think they're -10dB inputs). Should I connect it to my guitar input instead and match the volume of the HD Pro in tuner mode? Trying to get everything set up so I'm re-amping at the same level as I originally recorded. Many thanks



Re: Finally have dry guitar out working! Which input should I use?
by silverhead on 2012-11-19 13:11:44

Since the Dry Output on the HD Pro is tapped directly off the Guitar input, I think it should be fed into another Guitar input. It is not a Line Level signal.



Re: Finally have dry guitar out working! Which input should I use?
by chimp_spanner on 2012-11-20 10:02:21

Cheers Silverhead! It's kinda what I thought, but just wanted to check. I know dry guitar out over SPDIF is fine but I still have issues with sync lock using the HD Pro as master (as slave it's totally fine). In any case this looks like it will work perfectly. I can't begin to tell you how happy I am that this little £20 box has made the dry guitar out useable for me. I'd recommend it to anyone!




The information above may not be current, and you should direct questions to the current forum or review the manual.