These forums are read only, please use our new forums here.

Main :: POD Farm / POD Studio / TonePort



Pod Farm 2.55 amp models problem
by tangwest on 2012-11-20 09:11:26

Hello,

I am currently using pod farm 2.55 on my laptop with the UX1 interface and everything works fine for the most part, but I want to use Pod Farm on my Desktop PC (that does not have access to the internet) aswell. I installed PF 2.55 on my desktop, followed the instructions on the line 6 turoial video on authorizing Pod Farm and Model Packs on PC's with no Internet connection and copied over the AET files from my laptop to my desktop etc.

Everything seems to have worked fine as far as installation and authorization goes, Pod Farm was Authorized and all of my add on model packs seems to be there... but none of the the amp models are working! I am mostly getting a dry signal only, SOME of the effects and cabs are working, but it all seems to be pretty random. I have tested pretty much all of the amp models, I have tested it in both VST and Standalone Mode, nothing works. I am using the M-Audio Profire interface on my Desktop and running it on Windows 7 Pro SP1 64. My Pod Farm license IS platinum.

It seems to be the same problem that I and many other line 6 Windows 7 users were experiencing around the 2.51 update.

Any help would be great as i need to get PF up and running on my desktop asap.



Re: Pod Farm 2.55 amp models problem
by tangwest on 2012-11-20 20:23:32

Bump.



Re: Pod Farm 2.55 amp models problem
by Triryche on 2012-11-21 08:41:55

If you run the newest Monkey do you have green ticks for everything?

Is it possible to temporally connect this pc to the internet?



Re: Pod Farm 2.55 amp models problem
by tangwest on 2012-11-22 00:01:07

If i run the newest monkey on my laptop, then yes. I have green ticks next to everything. No I can not temporarily connect the desktop to the internet.



Re: Pod Farm 2.55 amp models problem
by tangwest on 2012-11-24 20:17:38

Bump. Any help guys? I am not getting any response in the ticket I've opened.



Re: Pod Farm 2.55 amp models problem
by tangwest on 2012-11-26 23:06:42

Can i get any help at all on this? I have had no reply on my support ticket since the 21st of november. This is unacceptable Line 6! I have been a loyal customer since 2007 and spent thousnads of dollars on Line 6 gear alone and turned a large number of people onto the ux1. I'm not asking for anything too big, just some basic customer service.



Re: Pod Farm 2.55 amp models problem
by Triryche on 2012-11-27 05:54:28

That is frustrating. I know they are probably getting off a 4 day weekend, not that that is any excuse.

If it were me I would call and ask them what the status of the ticket is.

Line 6 - North America

Line 6, Inc.
26580  Agoura Road
Calabasas, CA 91302-1921

Main Phone#: (818) 575-3600
Main Fax#: (818) 575-3601

Customer Service hours are 8am - 5pm M-F Pacific Time
Press option 3 for Customer Service
Our busiest hours are from 11am to 2 pm.

Line 6 - Europe

Line 6, Inc.
The POD
Clifton House
Butler's Leap
Rugby, Warwickshire
United Kingdom, CV21 3RQ

Telefone: +44 (0) 1788 566 566
Fax: +44 (0) 1788 566 529

Technical Support: +44 (0) 1788 566 555, Mon-Thurs 9am – 5pm GMT and Fri 9am – 4pm GMT



Re: Pod Farm 2.55 amp models problem
by EndOfGreatness on 2012-12-22 11:19:00

I have this exact same problem. It did this right after I replaced my mainboard in my computer, leading me to believe it might be a driver issue somewhere, maybe. I have reinstalled everything short of the OS. It's also the same as yours, windows 7 sp1 64bit.




The information above may not be current, and you should direct questions to the current forum or review the manual.