These forums are read only, please use our new forums here.

Main :: Spider Valve



Spider Mk1 40 watt valve combo.
by biffothebrave on 2012-12-01 08:39:20

Hello all.

Just bought a Mk 1 valve combo second hand without an instruction manual.

Boy do I have a problem.

Switch it on, volume is flat out.

Press any of the four saved pre sets and it blows you across the room.

Have tried the factory reset and it makes no difference.

What gives?



Re: Spider Mk1 40 watt valve combo.
by Rowbi on 2012-12-01 13:55:23

have you turned the master volume down?  That's where I'd start, unless you've done that already.

you can download a copy of the manual, via the support link at the top right of this page.  But here's the link for you: http://line6.com/support/manuals/

You should be able to work out what settings are stored within the presets using the blink out method, and then turn down the channel volume (which is the volume setting that's saved in the preset).  The master volume and presence controls aren't saved in the presets, they're 'master' controls that react to where the knobs ont he amp are positioned.

Hope this helps for a start

Rowbi




The information above may not be current, and you should direct questions to the current forum or review the manual.