These forums are read only, please use our new forums here.

Main :: POD 2.0, PODxt Family, Pocket POD, FloorPODs



Trouble with flood pod plus pedal
by ahmadvarhan on 2012-12-02 23:20:27

these are the instructions that i did to my flood pod plus ..

Floor Pod Plus

1  Hold toe-switch on VOL/WAH and power unit.  The display will read ?PC? (Pedal calibration) and then ?000?.

2 With the pedal at toe-position, hit the ?A? button.  The display will show 100

3 With the pedal at the Heel-position, hit the ?B? button.  The display will show ?100?

4 Press footswitch C to read the numeric values.  Press pedal-toe switch on and observe lights around effects encoder, which will reveal the pedal position.

5 Press and hold tap switch for 2 seconds to save calibration.

but, at the step 4 "Press footswitch C to read the numeric values.  Press pedal-toe switch on and observe lights around effects encoder, which will reveal the pedal position." the lights around effects encoder not reflect with the pedal position , the lights still off ..

so the pedal can't reflect when in toe or heel . how must i did ?

now i can't used the pedal . if i hold toe switch, the light "wah" is on.. but give no respon when i play the pedal .. please help . thanks ..




The information above may not be current, and you should direct questions to the current forum or review the manual.