These forums are read only, please use our new forums here.

Main :: POD Farm / POD Studio / TonePort



Rode Mic set up in POD Farm
by jnkitay on 2013-01-05 10:50:46

I just bought a Rode NT1A Condensor mic and I can't get any sound from it. Please Help!

I have the phantom power swtich on and the gain knob turned up for the corresponding line input (input 3)

I am getting a signal and the instrument pannel moves when I speak into the mic.

I have it in input 3 because I read somewhere that the first two inputs are dedicated to guitar?

I also have micorphone 1 input selected in mixer view in POD Farm

In system preferences under inputs and recording I have input source switched to mic for inputs 1 - 4 and the stereo checked off

in system preferences under outputs and monitoring I have all mute buttons switched off, volume turned up, and pan in the middle. When I speak into the mic, the sound bar moves indicating that I have a signal.

I am all out of ideas what to do next. Please help



Re: Rode Mic set up in POD Farm
by Triryche on 2013-01-05 18:46:20

What device do you have?



Re: Rode Mic set up in POD Farm
by jnkitay on 2013-01-05 19:37:02

UX8



Re: Rode Mic set up in POD Farm
by Triryche on 2013-01-07 06:19:01

I'm assuming you are you using XLR cables?

Also, how are you monitoring the sound (or lack of).



Re: Rode Mic set up in POD Farm
by jnkitay on 2013-01-07 10:54:19

One XLR cable from my Rode micorohone to the Micorphone Line Input number 2 on the UX8

I am using KRK rockit 8s connected to the "main outs (1 and 2)" at the back of the UX8 using planet waves instument cables

UPDATE: I can now get some sound, but it is very quiet and I can't get the voice plug ins on POD Farm to work.




The information above may not be current, and you should direct questions to the current forum or review the manual.