These forums are read only, please use our new forums here.

Main :: POD 2.0, PODxt Family, Pocket POD, FloorPODs



Will this power supply work
by Ndcj85 on 2013-01-25 13:34:09

Hello there i have just ordered a line 6 pod 2.0 and i have searched everywhere over the internet and found no answer so here is the question for you guys.

Will a 9.6volt 200ma 240vac 50hz 8w power supply work with the pod 2.0?

Please help

Thanks.



Re: Will this power supply work
by silverhead on 2013-01-25 16:01:01

Seems you need the PX-2 (or 2g)

http://line6.com/support/docs/DOC-4269">http://line6.com/support/docs/DOC-4269">http://line6.com/support/docs/DOC-4269

Check the specs here; make sure anything you use matches EXACTLY.

https://www.globalfulfillment.net/gfsnet/line6/10Expand.aspx?ProductCode=98-030-0042-05



Re: Will this power supply work
by toneman2121 on 2013-01-25 17:41:38

the output must be 9 volts AC. and depending where you live, the input volts must be compatable with respect to the power supply. 200 milliamps is not enough current to sustain the pod. the minimum is1500ma.




The information above may not be current, and you should direct questions to the current forum or review the manual.