These forums are read only, please use our new forums here.

Main :: Relay Digital Wireless



two transmitters(Tbp 12g) to one channel on one receiver (G50)
by MAURO_ISOLATION on 2013-01-30 19:58:09

Hi!

i have 2 basses and one Relay G50. I usually use only a bass with g50...(so... one transmitter and one receiver) and I connect the other bass with a cable.

I'm planning to purchase another transmitter (TPB 12G) to use both basses (wireless) with a single receiver.

I would set the two transmitters to one channel on the receiver to switch between instruments during the show. (i use different basses for different songs).

Can i  turn down only the volume of the bass that i'm not playing (during a song) or i have to turn off necessarily the transmitter of the bass that i'm not playing?

So...is it possibile to have 2 transmitters power on simultaneosly but playing one bass at a time?

Thank you in advance!



Re: two transmitters(Tbp 12g) to one channel on one receiver (G50)
by dboomer on 2013-02-01 16:09:24

You cannot have two transmitters on ( on the same channel) at the same time.  It's the radios that would interfere with each other not the audio.



Re: two transmitters(Tbp 12g) to one channel on one receiver (G50)
by MAURO_ISOLATION on 2013-02-01 18:09:04

Thank you.

So... it's possible to use two transmitters (on the same channel) and one receiver but I have to turn off the transmitter of the bass that i'm not playing (in a song).

Or...alternatively, i have to set a different channel on the receiver for each transmitter and switch between the channels.

Right?



Re: two transmitters(Tbp 12g) to one channel on one receiver (G50)
by dboomer on 2013-02-02 19:06:38

correct




The information above may not be current, and you should direct questions to the current forum or review the manual.