These forums are read only, please use our new forums here.

Main :: POD HD


Support forums for all POD HD products


PODHD 500 Edit and Monkey v1.62 can't detect the device
by arceon on 2013-02-02 15:33:43

It's been months since I fired up HD500 Edit and today it won't detect the device itself. So I tried to see if there are updates but even Monkey couldn't detect it. I went ahead anyaway and dowloaded the drivers with the PODHD 500 "not connected" to see what would happen. After installing the drivers and turning off Monkey, I tried EDIT again but it's the same problem. I also tried to look for any new USB firmware but for some reason it isn't easy to find here.

Anyone got anything up their sleeve on this problem? THANKS!



Re: PODHD 500 Edit and Monkey v1.62 can't detect the device
by TheRealZap on 2013-02-02 15:42:58

have you tried plugging into a different usb port?



Re: PODHD 500 Edit and Monkey v1.62 can't detect the device
by arceon on 2013-02-02 15:55:30

Yes, I tried different USB ports. I even tried it on another PC with Edit and Monkey but nothing happened.. 



Re: PODHD 500 Edit and Monkey v1.62 can't detect the device
by TheRealZap on 2013-02-03 19:58:54

check the usb connector in the hd500, i suspect you have broken it.




The information above may not be current, and you should direct questions to the current forum or review the manual.