These forums are read only, please use our new forums here.

Main :: POD HD


Support forums for all POD HD products


Pod HD500 with MicroKorg
by TristanTTN on 2013-02-18 21:34:17

Is it possible to connect the MicroKorg to the Pod HD500 so I could moniter/record the audio of the MicroKorg?

I am using the Pod HD500 as my audio interface and do not have the MicroKorg yet to test it out.



Re: Pod HD500 with MicroKorg
by GTLazer on 2013-02-19 00:55:08

This thread neatly summarises what I was going to say: http://line6.com/support/message/327358



Re: Pod HD500 with MicroKorg
by TheRealZap on 2013-02-19 04:37:58

not sure what you mean exactly... but you can't use the pod as a MIDI interface if that's what you were getting at.



Re: Pod HD500 with MicroKorg
by TristanTTN on 2013-02-19 10:44:39

I know the Pod HD can't be used as a MIDI interface.

I just want to hear the AUDIO of the MicroKorg through the Pod HD since I don't want to buy a seperate audio interface or use my computer's mic input.



Re: Pod HD500 with MicroKorg
by TheRealZap on 2013-02-19 10:47:24

a few ways to do that... you can simply use the aux input... or what i would do is use the FX loop... since i'd want the stereo signal.



Re: Pod HD500 with MicroKorg
by TristanTTN on 2013-02-19 10:47:57

Thank you for showing me this thread. Quite helpful.



Re: Pod HD500 with MicroKorg
by TristanTTN on 2013-02-19 10:48:39

Thanks a lot!

That pretty much answers my question.




The information above may not be current, and you should direct questions to the current forum or review the manual.