These forums are read only, please use our new forums here.

Main :: James Tyler Variax Guitars


Support community for JTV.


is it possible to replace the pickup on 69?
by alory1995 on 2013-02-22 18:50:20

I found myself not so happy about the humbucker on the 69 because it's not so hot as the Seymour Duncan JB which i got used to  (for some hard rock and metal playing) so is it possible to replace the humbucker with out damaging the modeling system while keeping a balanced level?



Re: is it possible to replace the pickup on 69?
by Kupsik on 2013-02-22 22:47:56

I haven't done it by myself, but others have succesfully done it. You can find some answers here:

http://line6.com/support/thread/81001

http://line6.com/support/thread/81001">http://line6.com/support/thread/81001

_jive_internal="true" class="loading active_link" href="/thread/55449" title="http://line6.com/support/thread/55449

http://line6.com/support/thread/55449">http://line6.com/support/thread/55449

_jive_internal="true" class="jiveTT-hover-user jive-username-link" href="/people/Crusty_Old_Rocker" id="jive-41638113516648303365179">Crusty_Old_Rocker has good point in one of this topics: The magnetic pickups feed into the digital circuitry so that the audio signal can travel through the VDI cable.  This means that if you put in a pickup that is too "hot" it could result in clipping within the Variax circuitry.  You would want to be sure that the impedance and output of the pickups are comparible to what's already in there otherwise the levels could be all out of whack even if there isn't any clipping.

Also, there is wiring diagram for all JTV's in case you've missed it:

http://line6.com/support/docs/DOC-2496

">http://line6.com/support/docs/DOC-2496">http://line6.com/support/docs/DOC-2496



Re: is it possible to replace the pickup on 69?
by alory1995 on 2013-02-27 18:24:02

Thanks a lot for your answer Jan!

Exactly, the issue concerned me the most is the possibility of frying the modeling circuit, too bad that such specific details on the circuit might never be released officially:( But one of the thread you mentioned has a successful attempt and that dude said the mag PU won't affect the modeling circuit. I'm a bit confused.



Re: is it possible to replace the pickup on 69?
by Kupsik on 2013-03-01 23:47:06

As I've sad I've haven't done it by myself and I don't have skills and needed informations to help you. In my opinion best think you can do now is to use support ticket and contact Line6 with your problem - use this link http://line6.com/support/tickets/add.html

">http://line6.com/support/tickets/add.html">http://line6.com/support/tickets/add.html



Re: is it possible to replace the pickup on 69?
by toasterdude on 2013-03-05 04:41:28

I am bringing in my 69 to my tech for some more tweaks including swapping all the pickups. I have duncan p rails on my xplants and have had no issues. In fact normally the modeled sound is way hotter than mags sound. I am putting duncan prails in the bridge and neck and probably a lipstick tube in the middle.

Once I do that I will have an extra LPB body, JTV 69 neck and the original pickups. Basically a "gutless" JTV 69.



Re: is it possible to replace the pickup on 69?
by davidb7170 on 2013-03-06 21:16:58

I bought my 59 in 10/2010, got it in 5/2011 -- bumps along the way -- switch issue, but fixed. Saw no reason to change its pups --  they sound very good as they are. Bought another JTV in 10/2012 -- this time a 69S -- 3 single coil pups. Liked the way they sounded except for the single coil hum. I've been a Fender guy and know that's what to expect with SC's, but got spoiled by my LP and the JTV59 humbuckers... So I bought & installed a set of DiMarzio noiseless SC's -- the Injector Bridge, Area 67 middle, & Injector Neck. The install was kind of a pain -- lotsa wires and short leads etc, but I did it fine -- look at the wiring diagram of the new pups versus the L6 document mentioned above.

The new ones sound very good - have some more output the than the L6 originals, but are quiet as a church as far as hum goes -- even quieter than the HB's I have in the 59, my LP, and my 1973 Fender Tele Deluxe -- way quieter than my Strat. I really had no issues with the 69S's original pups' tones, besides the SC hum... Had to change the DiMarzio's cover from white to the mint green color of the L6 face plate & pups on the gold 69S, but that was like $10. Did it after living with the ones that came on the replacements for a couple of weeks, so had to open the guitar up again to do it, but was no big deal. Worst part was dealing with the trem bridge coming unhinged when the strings were removed to take off the front plate to get at the guts. I did ithe pickup swap in January -- not quite 2 months from receiving the guitar. The guitar's been a champ all along.

I know you're talking about the regular 69's HB, but you will probably run into some of the same stuff under the hood that I did. The only replacement I would worry about the pickup levels would be active pups, like EMG's etc that you would need to power with a 9 volt battery, If your target pup is passive, it should not be an issue. The guts are the same in all of the JTV's, as far as I've heard, and the 89's pups are supposed to hotter than the 69 & 59 HB's. From what I recall of discussions here, the 59 HB is hotter than the 69 HB, as they were trying to keep levels somewhat balanced between the 69's HB and SC pups on the same guitar, I'm not an authority on that, just recall it sometime ago coming up in the forums...

They had 3 different versions of the pickups for the 3 JTV's that they had funny code names so they could distinguish which went with what model -- Kirk was the 69, and then there was Bones (59) & Spock (89) -- Star Trek references. When I pulled my SC's out of the 69, they are marked Kirk-B, Kirk-M, and Kirk-N (Bridge, Middle, Neck)... Apparently they still are following that....

For what it's worth -- my 2 cents...

Dave




The information above may not be current, and you should direct questions to the current forum or review the manual.