These forums are read only, please use our new forums here.

Main :: StageSource Speaker Community Support



Got the Dreamstage - How to integrate the POD HD500 via Line6 Link?
by martinfrydas on 2013-03-04 23:41:36

Hello!

Me and my band we got the dreamstage ( M20d, 4xL3S, 2xL3t, 2xL3m, 3xL2m )

I am a vocalist and play Acoustic guitar - all over the POD HD - this has also a Line6 Link Output.

So how to get the POD integrated in the system? Only normal into the mixer?

just for information - i pan the Mic to Output B and the Guitar to A... maybe there is a better way to connect it

than go with 2 XLR's to the M20d....

But the POD does not have a Line6 Link Input like the Speakers....

or go into my Monitor? (L2m)

Thanks for your help!



Re: Got the Dreamstage - How to integrate the POD HD500 via Line6 Link?
by line6jonb on 2013-03-13 08:57:16

You are correct that there is no L6 Link input on the HD500.  You can connect a HD500 via L6 Link to a L2/L3m/t which will default the speaker to the Electric Guitar mode.  This speaker is effectively a full range flat response guitar amp at that point, however the best way to integrate the HD500 into your full system would be to take the analog outputs from the HD500 into the analog inputs of the M20d. 



Re: Got the Dreamstage - How to integrate the POD HD500 via Line6 Link?
by ciurli on 2013-03-18 13:13:22

When I connect L3 and hd500 the stagesource switch on PA reference and if I move manually to electric guitar the first time I change effect it move to PA again

Someone know how to solve?




The information above may not be current, and you should direct questions to the current forum or review the manual.