These forums are read only, please use our new forums here.

Main :: POD Pro



Pod Pro Problems
by Barkdog666 on 2009-06-06 12:56:11

Hi, I have two Pod Pro's, one has the front guitar input missing. Is there anywhere I can get a replacement?

The other has a problem when using the Line 6 Insane distortion. I have to keep the drive below 25% or it gets very noisy. It creates feedback even when the guitar volume is down. Even below 25% its a little noisy.

Thanks



Re: Pod Pro Problems
by Line6Hugo on 2009-06-08 14:41:44

Barkdog666,

If you feel you can successfully solder an input jack on the POD Pro main board, you can contact our customer service line to request that part.

(818) 575-3600

On the noisy POD, you can try resetting the POD Pro by holding the 'UP' and 'DOWN' arrow buttons as you power up the POD. Keep in mind that this will reset your presets. If it still has issues, or if you are unable to install the jack on the other POD, you will need to contact an authorized service center:

http://www.line6.com/support/serviceCenters/

Regards,

Line6Hugo



Re: Pod Pro Problems
by Barkdog666 on 2009-06-08 16:00:48

great, thanks a lot. the reset worked!

i also called and they sent me an input for free. and luckily its a plug in, so no soldering.

Thanks.




The information above may not be current, and you should direct questions to the current forum or review the manual.