Jump to content

All Activity

This stream auto-updates     

  1. Past hour
  2. Today
  3. datacommando

    Helix Native in Logic - worked now doesn't

    Hi Matt, Sorry to hear that HXN has gone flakey on you. Line 6 aren’t doing a great job of inspiring customers with this sort of thing. There are many others on this forum with very similar complaints and should have been dealt with - fast! The post from “soundog” above seems to address most of the things that I would have to say about this other than, the delay in getting this resolved is more than likely due to the fact that the Core routines of the operating system, across all the range of Helix products, are being brought into line. This should mean that the totally bug free updated version of Native will, hopefully, be released with the next firmware which has been promised by “late spring”. I imagine that will be before the end of June 2019. I realise this does not particularly help with your situation, especially when there are so many HX Native users who have no issues. When it does work you have a full Helix brain without the hardware and it is impressive. It’s such a shame that Line 6 have not been able to put a little time aside to squash this bug, which seems to be a glitch in the “phone home” system.
  4. Alex_SF

    Pod HD Desktop - broken USB jack: replacement?

    Thanks again for the pointers to FullCompass for the parts. I just replaced the USB jack, and also the rotary encoder, which I discovered was also messed up (I normally use Pod HD Edit to switch patches on this thing, so no telling how long that's been broken). The four USB jack connectors that solder to the board were totally sheared off; I'm sure now that the unit got kicked or something while plugged in on the floor. Fired it up and tested the connections; both replaced parts seem to be working correctly now. One last question, if anyone's still paying attention: I found these little black plastic bushings or spacers inside the unit (like a 3/8" long section of hard plastic tubing, about 3/8" in diameter), but can't tell what they go to. The unit went back together fine with nothing seemingly loose; does anyone know what those spacers do?
  5. bluskiff

    HX Stomp FAQ

    The more I get into the stomp the more I realize how limited it is. I may end up returning it. Just wish there was something between the stomp and the LT. My problem is size. Needs to fit in carry on luggage. I do alot of fly gigs. I know the fractal fits but would rather stay line 6.
  6. Perfect. Thanks for the heads up.
  7. WalterJinkens

    Watts drawn from Hd500x with jtv59 being powered by it.

    Thanks! So I was looking at getting a power bank and wanted to make sure a 50 or 100 watt would be efficient enough. I play4 hour gigs sometimes so need something that'll run at least that long.
  8. allyboo22

    POD XT Advice

    Hi there, Thank you so much for the reply. I'll look into getting the triple bundle pack. When I do have it, how do I transfer the amp models from the pod farm to the xt?? Thanks again for your help and advice!!
  9. rsvette12

    Pimp my Helix - aftermarket accessories?

    I tried Mooer colored they looked cheap picked up these Mooer mushrooms look awesome with Black Raven protector Cheap also buy 2 bags as they only sell bag of 10 if you want to load all 12 buttons - fit is perfect - dont look that great in pics in real life they are great - the clear buttons accent the protector The Helix buttons are short so they dont look weird they are very close to face protector, for the money a no brainer and light up nice The other offerings bug me not a fan of seeing the locking screws through the acrylic https://www.amazon.com/MOOER-Effects-Footswitch-Toppers-SHROOMS/dp/B07F2ZZ3NT/ref=sr_1_fkmrnull_1?keywords=mooer+mushroom&qid=1558490240&s=musical-instruments&sr=1-1-fkmrnull
  10. Have a spider IV. At each and every string attack, it cuts out and fades back in as the note softens. Almost like a gate. If I turn the instrument vol. way down, problem stops, but that's no good. Anyone???
  11. Yesterday
  12. Gracias. Lo probaré.
  13. If you are done with L6 and have no intentions of coming back... You don't need to authorize/deauthorize or anything like that. You can sell the pod and give the buyer your account. That's one less transfer that needs done.
  14. https://www.thomann.de/gb/graph_tech_ghost_saddle_set_pn800000.htm Worth the money, your guitar will get life.
  15. variaxsexhundra

    Variax 600 uneven sound levels on piezo pickups

    Here are a picture from when i replaced my piezo, very quick and easy to do with a pointy soldering pen
  16. datacommando

    Odd preset after updated to 2.71 on HX Effects

    ^^^^^THIS^^^^^ If only some one would - yep! surenuff - easy enough to answer if you have a HX Stomp, but as I noted previously, the trouble is a lot of the presets change with every revision of the Firmware - maybe not many Stomp owner’s either know or care what is in slot 16A. I still think it is down to Line 6 staff having one of their little jokes. For anyone unfamiliar with some of the zany humour available, just read the final bullet points in the “Known Issues” section at the end of the release notes for v2.70 regarding registered users who did complain about the tuner. That’s just one instance - there is a stack of it out there. They’re having a laugh!
  17. hurghanico

    POD HD500 Foot switch FS3 broken

    Rather than broken it seems to me disassembled, who knows maybe it came out of its seat after a too vigorous use .. gives me the idea of something that could be reassembled correctly, but certainly not from the outside, so it would be necessary at least to remove the lower panel to access the internals and to try to fix it in the right way. _______________________________________________________________________________________________________________________________________________________________________ All about POD HD500/X
  18. jerseyboy

    JTV New Or Used??

    I’ve bought a few used Variax sight unseen. Most important criteria being vendor return policy. Know your vendor and your right to refund in case it’s a clunker. Bought a used JTV59 shipped from Guitar Center used gear. As always, I was prepared to pay return shipping (or drop off at retail location in this case) for refund if the guitar turned out icky but it was fine. Now it did suffer some push-push switching deficiency unique to JTV59’s but fortunately I’m skilled enough and found mojo bone for tightening up and adjusting those particularly finicky controls on the older 59’s. I think this one was built 2013? Works a champ now. Serious amount of playing 20-30 hrs per week nearly 2 years for $600 shipped, IIRC.
  19. Thanks!, I'm just trying manual. I push the guitar type selector till it flashes. Then choose a alternate tuning position. Play the tone I want, check and store by pushing the type selector again. As described in the manual. My PC setup would be thru a pod xt live. What means having the low E string set wrong? So I'm happy it's not the piezo!
  20. MLSoundLab

    IR length discussion

    Tell me about it. I still keep getting recommendations from POD HD users to make my IR's usable with the HD.
  21. hurghanico

    POD XT Advice

    If you buy and install the Triple Pack Bundle Model Pack in your XT you will have all the models included in POD Farm: https://shop.line6.com/software/model-packs/triple-pack-bundle.html if you don't need all of them, you can buy the separate model packs for your device: https://shop.line6.com/software/model-packs/?cat=23 ------------------------------ other solution: sell the XT and buy the X3 which has all POD Farm models already included
  22. hurghanico

    Watts drawn from Hd500x with jtv59 being powered by it.

    What I know is that the current drain of a Variax is around 500 mA ..and I guess that around 2 A would suffice for the POD alone (not powering the Variax)
  23. If you go in the Activations page of your account and click on the "details" link of each model pack you own, you will then find a button labeled GIFT. I guess that you have to press that button and then follow the instructions you will be given to do the license transfer procedure, and then repeat the procedure for every model pack you own. At some point you will have also to remove the device in the Registered Gear page of your account. _______________________________________________________________________________________________________________________________________________________________________ All about POD HD500/X
  24. Hola,¿estás hablando del tablero Line6 Stage Scape? yo uso un enrutador Wifi AC1200 de Netgear. También utilizo el cable adaptador de Apple USB a Eithernet. Probé otros cables adaptadores y no funcionaron, solo Apple lo hizo. Estoy usando el traductor de Google para esta conversación. https://www.amazon.com/NETGEAR-AC1200-Router-Gigabit-Ethernet/dp/B0756QFLXP/ref=asc_df_B0756QFLXP/?tag=hyprod-20&linkCode=df0&hvadid=309807187084&hvpos=1o1&hvnetw=g&hvrand=13428333194723174275&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9012299&hvtargid=pla-570384821745&psc=1 https://www.amazon.com/Apple-USB-Ethernet-Adapter-MC704LL/dp/B00W7W9FK0/ref=sr_1_7?gclid=Cj0KCQjww47nBRDlARIsAEJ34bk85xEmFOb3w289HCBdGMjxf3y_uFtQVId47XwamXIfwbkPj7Rc8pkaAjGAEALw_wcB&hvadid=177252415619&hvdev=c&hvlocphy=9012299&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=230436313541308689&hvtargid=kwd-77952192411&hydadcr=18037_9812657&keywords=apple+usb+adapter+ethernet&qid=1558472637&s=gateway&sr=8-7
  25. Awesome!! Thank you very much.
  26. robertinnes5

    Spider iv 75

    Thank you , the top speaker is from my Line 6 amp (75 watt) the other speaker is from another amp ( 30 watt ) but an 80 watt speaker ... Don't know nothing about impedance just thought the 2 speakers would work together , stupid eh ?
  27. jonandtice

    Single vs Dual amp path channel volume matching

    I had an error in the post which I edited. To put in in your terms: Given: X = Input signal level Y = Output signal level (or anywhere after the merge block) Where: Split A/B = A100 Path A = X Path B = 0dB Y = X - 3dB Where: Split A/B = Even Split Path A = X Path B = X Y = X Also note, this is taking the amps out of the equation so that all things are equal from input to output. So yes, you would add +3dB to each path on the merge block to make Y = X. Hope that helps.
  1. Load more activity
  • Newsletter

    Want to keep up to date with all our latest news and information?

    Sign Up