Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 12/25/2021 in all areas

  1. I had problems running Vyzex with MAC OSX Catalina. Since the Vyzex editor is a 32bit application and MAC OSX Catalina supports only 64bit applications it simply doesn't run. So I hat to take action and created an editor for the Pocket POD that can be used online without installation. Since it is a progressive web application it can also be installed by adding it to your home screen. It is not limited to a desktop/laptop but works also on mobile devices that support MIDI via browser. Enough said: Here the project page with some screenshots: https://sourceforge.net/projects/pocket-pod-editor-online Here the Pocket POD online editor: https://pocket-pod.web.app Here a screenshot working with Samsung Galaxy S10
    1 point
  2. I would be grateful if you could confirm if my configuration is correct to use my simulations correctly. MY TEAM: POD HD500X POWERCAB 112 PLUS 1- My POD HD500X is connected to the POWERCAB 112 PLUS through the L6 LINK ports of both units (I understand that, in this way, the data transfer is done digitally). 2- The MODE setting of the SETUP: OUTPUT page is selected in Studio / Direct. Is it the right selection or should I select Combo Power Amp or Combo Front? 3- I select an PRE AMP MODEL (for example the Brit J-800 Pre) Is the selection correct or should I select the full amplifier version Brit J-800? 4- I select a CAB MODEL (for example the 4x12 Brit T-75) Should you not select any CAB MODEL and select a Speaker Mode or a User IR Mode on the POWERCAB 112 PLUS? Should I select a CAB MODEL in the POD and also a Speaker Mode or a User IR Mode in the POWERCAB 112 PLUS? Should I select a CAB MODEL in the POD and also FLAT MODE (Speaker emuation is disabled) in the POWERCAB 112 PLUS? If you use Speaker Mode or User IR Mode on the POWERCAB 112 PLUS, could you change them automatically, according to the preset used on the POD HD500X, via MIDI cable? 5- At POWERCAB 112 PLUS, currently, I select FLAT MODE and Voicing LF Solo ((LF Raw). Is the MODE and Voicing adequate? Thank you very much for your time. Enviar comentarios Historial Guardadas Comunidad
    1 point
  3. Hello, 1. I use a full AMP MODEL, a CAB MODEL and a MICROPHONE in the POD. 2. I connect to the POWERCAB 112 PLUS through the L6 LINK ports of both units. 3. I use the FLAT mode on the POWERCAB 112 PLUS. 4. I understand that the use of any of the VOICING (FRFR, LF RAW, LF FLAT) does not imply that you are no longer using the FLAT flat response mode, otherwise it would change to SPEAKER or USER IR mode.. 5. The use of FLAT mode with VOICING FRFR on the POWERCAB is quite disappointing using a full AMP MODEL, a CAB MODEL and a MICROPHONE on the POD. 6. Using the FLAT mode with the VOICING LF RAW or LF FLAT on the POWERCAB 112 PLUS while using a full AMP MODEL, a CAB MODEL and a MICROPHONE on the POD sounds much better 7. Is my POWERCAB really amplifying what happens in the POD or is it modifying the POD simulator? 8. I don't really understand VOICING in FLAT mode. If I use LF SOLO mode or LF FLAT mode, does it imply that I am not using FLAT mode? If so, why are the SPEAKER mode and the USER IR mode? Thanks for your reply
    1 point
This leaderboard is set to Indiana - Indianapolis/GMT-04:00
×
×
  • Create New...