Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Ed_Saxman

Members
  • Posts

    291
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by Ed_Saxman

  1. Glad you solved it.

     

    Regarding the FS Toggle... that feature was introduced with the 3.10 Firmware, I think. So check first if your version are up to date.

     

    Anyway... If your external device can receive MIDI, you can use Command Center to make every FS in that Preset to send OUT their own MIDI values, so both devices will be synced. You have to do this per preset (and make sure that HX Edit isn't interfering in the FS status when you're editing the preset, since it doesn't send regular MIDI messages but their own propietary protocol)

     

    If your external device doesn't receive MIDI, then configure it to use Momentary actions instead, sending just an unique value (127). In this way the Helix will toggle the FS anyway. Yes, you lose the visual feedback outside the Helix, but this is the easiest way.

     

  2. It don't make any sense, apparently.

     

    Facts so far:

    • CC50, values 0 (off) 127 (on) (now it works as Toggle), is the right CC for FS2. (B0 32 00 - B0 32 127)
    • Preset 26B is MIDI PC 109 (C0 6D)

    So...

    1. Try over an empty Preset with just a block assigned on FS2 to see what happens. (maybe that second assingment it's causing the issue)
    2. Check your MIDI Log to see if your external devices are sending the right messages.
  3. On 8/8/2021 at 2:02 PM, bricker211 said:

    Will this work on iPhone too?

     

    Not really, MD requires specific Layout versions made for the iphone.

     

    I've made a iPhone Layout for the iCon G-Board and the HX Stomp, but it works even without the G-Board.

     

    It's not so updated, but it's cheaper, and it works:  https://ed-saxman.gumroad.com/l/ALVVU

     

    Was made using an Iphone 5C (So I don't really know how it looks in bigger screens)

  4. Wireless MIDI Controllers for IOS - AUGUST 2021 UPDATES!

    https://line6.com/support/forum/96-promote-your-patches/

    Based on the new MIDI implementation from Firmware 3.10

     

    • Includes SAVE button (All models)
    • Includes MODE button (Helix Floor, Helix LT, Helix Rack, HX Effects)
    • Includes VIEW button (Helix LT, HX Stomp)

     

    Helix Floor/Rack (main view)

    50841130341_9ad8efd2e9_k.jpg

     

    Helix LT (main view) NEW layout! included with the HELIX Floor/Rack layout

    51348829101_b3e88fc213_k.jpg

     

    HX Stomp (main view)

    50818367436_5203dba7bb_k.jpg

     

    HX Effects (main view)

    50741151566_d6f8eecbbe_k.jpg

  5. On 5/21/2021 at 4:10 AM, EJmo said:

    Hello Ed, is 1.0.1 an updated version that will work with 3.1. Do I need pay again to get this version? The 1.0 only worked on a few things. 

     

    Hope all is well!

     

    EJmo

     

    Hello EJmo, I'm sorry to answer so late.

     

    The Version 1.1 is ready (check your inbox). It's made to work with Firmware 3.10 or later.

     

    Updates are free forever. You will receive updates directly to your E-mail.

  6. On 7/29/2021 at 1:04 AM, rd2rk said:

    No. Strangely, on the HXS, CC#71 allows you to select the Mode, but NOT on HXFX or HXS-XL. At least, per the manuals. Weird.

     

    CC71 works on the HX Effects too, but it swaps Effects/Banks view.

     

    To enter in Snapshot view you still have to press FS1&7 while in Banks view, though.

     

    BTW, We are just a few hours away from receiving the new update based on the new 3.10 MIDI implementation for my Helix iOS controllers.

     

    This is the new v1.1 HX Effects layout:

     

     

    photo_2021-07-31_17-26-40.jpg

    • Upvote 1
  7. 8 hours ago, roscoe5 said:

     

    They don't seem to handle my 5 string bass well though.  Quite a bit of buzz / rattle / flapping on low E and lower to B.  I contacted Line 6 support to see if this is normal.

     

     

    1- That rattle is caused by a defective fan. Mine had to be replaced too (L2T)

     

    2- For bass you’ll need a L3

  8. ROLAND FC-300 SYSEX Mode for HX STOMP has been updated to version 2.0!

     

    50870117608_96ce1ca9ed_o.png

     

     

    I recently purchased a pair of CME WIDI Master, and found how well it works with SYSEX messages, unlike the Yamaha BT-01 I was using before.
    This has meant that my Layout for the Roland FC-300 is now fully Wireless, so I've taken the opportunity to update it to version 2.0.
    It is now quite a bit more complex, including memory for 9 banks of 5 presets. It has also been redesigned to look better.
     
    This MIDI Layout is an example of how MIDI Designer 2 can control several devices at once, establishing communication between them all. Without needing a single cable.
    It is composed of about 1000 lines of Streambyter code, necessary to control the SYSEX implementation of the FC-300, at the same time that it controls the HX Stomp.
    This means having implemented a complete customized SYSEX mode so that both devices work together in a logical way.
     
    The Roland FC-300 is battery powered, so with the CME WIDI Master, the iPad, and this Layout it has become a great device to remotely control the HX Stomp.
     
    The FC-300 may not be the most popular MIDI controller today, but it is the only one in the world to have a SYSEX mode specifically designed for the HX Stomp!
     
    Someone interested on a HELIX version?
  9. Seems like you're describing an HX Effects. It works pretty well just as a Controller, and it doubles as a DSP extension, if needed.

     

    If you already have an iPad, you may consider using it as a MIDI Controller. I have made two different controllers for the Floor/LT/Rack.

     

    1- Icon G-Board for Helix Devices: New 2021 release. Made to work with an iCon GBoard, including synced LEDs. This same Layout also works as a standalone controller. And the GBoard doubles as a Mackie MIDI Controller when used with a OS X computer running Logic Pro.

     

    2- Helix Wireless MIDI controller: This one is about to be updated (probably next week). It works primarily as a standalone MIDI Controller (wireless or wired), but also will receive embedded support for the iRig Blueboard, and a small MIDI implementation to use any other configurable MIDI controllers.

×
×
  • Create New...