gerryCol
-
Posts
75 -
Joined
-
Last visited
Status Replies posted by gerryCol
-
Hey surfsup, thanks for this, what IR are you using ?
-
Hey surfsup, thanks for this, what IR are you using ?
-
Another question. This is something I sent to line 6 support. when I plug my usb into my computer to use HX edit. The ground loop/hum is tremendously loud.
I literally have my master output at the end of my blocl maxxed out just to compensate for it. And it's almost even.
I have used 2 different computers
Various usb cable
Various outlets
Ground lifts,
Nothing works
Any ideas?
-
-
Hey surfsup, thanks for this, what IR are you using ?
-
Yes The K&K trinity I believe is the pure mini with the mic. The preamp is for the MIC primarily but it does add volume to the 3 transducers as well. It sounds great but I was surprised at how low the output was without the preamp. Do you have to add a lot of gain to your output at the end of your L/R block in HX edit?
-
-
Hey surfsup, thanks for this, what IR are you using ?
-
The mixes sound very nice on sound cloud. You were able to retain the martin tone. Also the low end works very well. And thank you for the Piezo preset. I intend to work with it today.
So I have a big question for you. I just installed my K&K trinity microphone. I am going to hammer things out today. I also got the K&K preamp. My question for you is do I need to use the K&K preamp for the pickup. I tried it briefly after the install directly into the board (no preamp) and even with a big gain boost, the level was very low.
What I had hoped I could do is plug the K&K pickup along with my piezo pickup into my left and right input of my HX Stomp. I already created a stereo patch where the left and right side can have their individual paths for blocks like EQ and compression and come out stereo to my board. If I have to use the K&K preamp it will be a drag.
-
-
Hey surfsup, thanks for this, what IR are you using ?
-
Hi Peter,
First off thank you for all the help you have given to the acoustic guitarists out here in the terrifying computer age. I have an obstacle I can't seem to work around. I decided to put together an acoustic gig. I have a Takamine G series acoustic (PIEZO pickups), not the greatest guitar but it does sound good enough direct in the P.A. that I figured it would only be better going through an HX Stomp so I got one. It does sound better in all areas but big body strumming guitar. My guitar sound like it's made out of aluminum. Any of the IR's I use or any presets I have downloaded are fine (for the most part) for fingerstyle or single string acoustic songs. My issue is with my strumming sound. I have all the top IR's and have spent more time than I want to admit trying to get that big round sound out of the P.A. To tell you the truth, it's pretty awful. Very hard and quacky. I have been an audio engineer for over 25 years and a guitarist for over 35 and no matter what EQ'ing I try, It sounds horrible through the P.A. I have great P,A, speakers; QSC k.12, Good board; Mackie DL1608. I'm going direct from the acoustic through the Stomp out stereo into the board. Is there something I am missing somewhere? Thanks for any help or suggestions. I am happy to try anything, Or even if you know what frequency I really need to roll of would be appreciated. Thank youGerry
-
Hi Peter,
thanks so much for getting back to me. I have made some headway. I have come to terms with the fact that PIEZO pickups are inherently very quacky when strumming. And I am pretty percussive and that doesn't translate into more bottom on a PIEZO just more quack. So after searching through every IR I had which is just about everything from Sigma and more. the best ones are the ones I downloaded from you. The 109_slope_jumbo and the super_jumbo were best for my guitar at 25%. Anytime I add too much IR mix I seem tp get horrible phasing issues. Does anyone ever use an acoustic IR at 100% ???To counter the quackiness of the PIEZO I ordered the K&K Sound Trinity Mini PRO Guitar Pickup System.
*I am going to plug my Takamine Piezo to the left input of my stomp (Panned Left)
*I am going to blend the K&K System (Mic and Pickups) to the right
* I will eq each side to get the desired sound and blend them together into my live board.
Wish me luck but it should work.
Thanks again.
Gerry C
-