jandrio

:D :D :D

i beta tested those....

it was love for the first 15 minutes....

second day it was pure hatred.

they had a clang like tone, were tense and more rigid than i liked.

maybe i should have just tried the next gauge down.. (i was using 10's)

this was on a regular telecaster and not a variax though....

they also had an oddly polished feel that i could never get used to as well.

i use 9's on 69s, excellent sounding, top playability, shining models, they stay in-tune longer...

oh, i c,  u finally have a HD 500.

may b the firewall/antivirus is manipulating the file.

can u try updating via monkey on a different computer?

download POD HD 2.62 f/w from  here ...

don't  bother, this was nothing special, just a quick off-line demo patch on the fly, implementing cruisinon2's decription :)

try the D’Addario NYXL strings; they  will bend farther, sing louder 'n stay in tune better...

as far as the image uploading is concerned:

1.press the "More Reply Options" btn on the lower right side of ur screen...

2.press the "Browse" btn

3.select file

4.press the "Attach This file btn".

now, on the "file incompatible" msg,  ensure u download the PROPER HD500 2.62 file (click here)...

Alternatively, u'd better use monkey.

the patch was only a demo one...

i used the hiwatt+line6 amps purely 4 demonstration purposes.

u choose whichever amp fits ur needs.

similarly, the mixer left and right channels must b set according 2 ur needs as well.

glad u figured it out.

john :)

check out attached test patch (cruisinon2 test tone).

also cosnult foll vids:

cruisinon2 test tone.zip

2.62 IS compatible with HD500.
check the downloaded file size and MD5 Checksum.

The MD5 Checksum is a file validating algorithm which we use so that you can verify that files you download from this site are not corrupted during the download process. If you have problems downloading or installing the file on this page, make a note of the MD5 correct checksum posted below, then click HERE to download the Line 6 MD5 Checksum utility. Instructions for using this utility are on the page it is downloaded from.

correct readings r:

Filesize = 891.86 KB

MD5      = 2cad53bae2a4bf2438ea65b7aeb276bb

pls also provide us with more dtls, such as screeshots, error msgs, etc

...So from the graphs I would say that some people would detect a difference, but most rock guitarists probably can't ;)

well, with GEQ=off, i cannot hear any difference b2een 2.62 + 2.32 :)

...something similar when you touch the tip of the guitar jack but at very high volume and tone.......

r u sure it is NOT a bad cable or a poor contact?

when u save each patch, the models on-off state is also saved.
so i u save one patch with the models off/on, everytime u recall it,  it will set the models 2 the saved off/on position accordingly.

I ensure I wasn't doing absolutely nothing, just playing.... I use to practice with the same patch... just plugged my guitar, turned on and play...

so u say this ..."gentle-bug" is a bright-new one...

can u reproduce this noise?

r u on 2.62?

this bug was fixed on 2.31 (Released 4/8/14)...

POD HD500 RELEASE NOTES v2.31.00
...
This release addresses an issue with audio feedback that could potentially occur when changing patches with a specific combination of settings. It is strongly recommended that all users install this update as soon as possible.
...

Hurg, I agree. Yes, there's a difference between Global EQ on/off but I doubt anyone can hear.

i read from the graph that leaving GEQ on we have kinda low + hight cut filtering effects.

may b this explains why some members posted abt 2.62 improving the sonic signature of their patches...

ok, now it's clear: u "install"  the tape prior 2 fitting the strings!

tks clay :)

cld u pls post a foto?

what abt the intonation screws?

u mean the small space b2een 69s saddle+bridge?

tks SH, good 2 know :)

1.download flash update file on ur computer.
2.disconnect ALL cables from ur hd device.
3.reboot computer.
4.reboot hd on safe mode.
5.perform manual flash update from file using monkey.
6.if problem still exists try other usb port/cable.

7.if problem still exists try other computer.
8.report back if problem still exists.

http://line6.com/support/topic/13051-hd500x-firmware-updated-but-flash-wont-update-to-261/

http://line6.com/support/topic/13160-repetitive-rebooting-of-500x-after-attempt-at-flash-upgrade

u r welcome :)

http://line6.com/support/topic/13281-whats-going-on-with-line6-support/?do=findComment&comment=94520

Yes.

just 2 verify,

under 2.62, does the global reset proc also reset the settings of the GEQ  2 factory defaults?

Lo Cut   = 20Hz

Low      = 150Hz

Mid      = 1.8KHz

High     = 8.0KHz

High Cut = 20Khz

All Qs   = 0.7

All Gains= 0.0dB

The EQ default status= ON.