jandrio

What's with the weird extra beat during the riff just before the "oh yeah" part? Throws the whole groove off. Tone is fine, but that beat skip part blows the groove.

 

cld u pls specify which position (sec) this extra beat skip is?

Try one of foll:

a. Insert an FX loop in ur chain (place it at the end of the chain if u want a plain clean boost, or in front of an amp or dist pedal to drive them harder if u want more gain). Use short jumper cable 2 connect the FX loop out to the FX loop in. Set the FX loop return at taste (eg +4dB). Assign the FX loop to a switch as (clean) boost 4 solos. . If stereo is a must, use appropriate jumper.

b. Use a Studio eq in ur chain (c abv regarding placing). Set gain at taste (eg +4db).

c. Assign EXP-1/2 to amp CH VOL (min = rythm, max=solo).

output mode affects cab/mic simulation.

setting 2 "studio/direct" u get excellent acoustics/full models WITH cab/mic from Lspeaker 'n u shld only feed the hd500  pre/no cab/mic 2 the dt amp+cab.

just guessing, since i do not own a dt...

Any guitar is going to interact between strings when tuning.  The neck bends as you change the string tension even if you don't have a trem.  If you have a trem, the whole trem block  moves when you adjust one string.  You have to go through the strings tuning them until they are all in tune.  Doesn't matter what order if you are using a tuner.

 alternatively, u cld use tronical autotune....

with just 1 strum 'n all strings r perfectly tuned...

check out this tone:
http://line6.com/customtone/tone/408465/
it migtht provide u with ideas abt it's usage.

it uses 4 preamps, no amp.
sound sample on this  vid...

...I'm just plugging directly into a cheap power strip into a power outlet.  Should I invest in one of these voltage regulators then?....

consider this investment as a "health insurance" fee 4 ur equipment.

I always feed my JTV+HD500 via a ups+voltage regulator+surge protector, etc, etc.

I never trust venue's power circuits...

u r welcome.

dual paths give u the option of having 2 different signals coming out of the left and right outputs.

how r u going 2 take advantage of this cool feature, it's up 2 u, i don't know ur specific amp configuration/capabilities.

suggested further reading:

http://foobazaar.com/podhd/toneGuide/

http://line6.com/sup...ing-schematics/

http://line6.com/dat...h ( Rev D ).pdf

http://line6.com/dat...h ( Rev A ).pdf

http://line6.com/dat...h ( Rev A ).pdf

rgds/john

u r welcome..

en anglais sil vous plait...

...Amplifi is easier to use and sounds good.

PODHD is harder to use and sounds better....

..and PODHD500+JTV is the B-E-S-T !

yes u can do this with the dual path feature of the hd500.

if using a JTV it is even more simple:

send the 1/4" out of the JTV 2 ur amp and the VDI 2 the HD500.

voila!

this is the official L6 vid:

pls give us more dtls:

-only acoustic patches?

-mags were performing ok?

-other models were performing ok?

-did u try the hd500 with nother el guitar besides the JTV and if yes, was it performing ok?

-did u send the acoustic audiovia xlr 2 pa? pls specify ur conn diagram.

-did u feed the hd500 via ups/voltage regulator, or direct from the el.power socket?

...Jandrio's link, tho informative, doesn't take into account the Link-to-DT part of the equation, it would be (somewhat) obvious if I were just running everything straight to PA.....!

since output mode affects ONLY MIC+CAB emulation, I believe that if u send the acoustic modesl (yes, u cld even achieve stereo!) via XLR 2 pa wld sound perfect.

so i suggest u set output mode 2 whatever sounds best 4 ur dt amp via L6 Link...

if running win7 and later, try disabling driver signature enforcement...

http://line6.com/sup...000/#entry51227

...if someone falls on it with a full beer in a club and kills it I can just go online and buy another one and keep on rollin'!...

+1

more dtls 'n demo patches here:

http://line6.com/support/topic/7343-jtv69-hd500x-mesa-boogie-395/?do=findComment&comment=51253

I design gear and manage existing (and yet unreleased) products for Line 6.  :)

I think that after the latest f/w updates on JTV/workbench-HD/HD500 and the complete integration of all these products, a wireless VDI 2-way 2-channel communication bundle between JTV+HD500, with power provided by the existing JTV battery pack module will b the last finishing touch to a good painted table...

http://line6.com/support/topic/3622-hd500x-jtv-hybrid-setup-is-this-possible/?do=findComment&comment=23991

...am now wondering if the jtv59 and hd500x may be all I need going direct into pa or studio monitor speakers at home....

I think u got it right my friend!

welcome 2 the 2.10 wonderland...

... There's not much you can do to compensate a soundguy with a tin ear....

absolutely true!

in these cases, during sound check prior the show, try feeding the pa with a couple of mp3 studio-mastered tracks of the songs u r gonna play and tweak the "master" eq till u get acceptable results...

... and IMHO his tones killed the other guitarists conventional PRS/Strat/335 etc...into tube amp tones....

+1