jandrio
-
Posts
1,203 -
Joined
-
Last visited
-
Days Won
26
Posts posted by jandrio
-
-
check out demo vid from our last gig.
JTV+HD500 direct 2 PA , no amp .
more vids with patches available @ :
-
James Tyler Variax Virtual Capo Video Tutorial
Virtual Capo on the James Tyler Variax
-
sounds logical 2 me...
-
aaahhh, ok, now it is clear!
u have 2 dongles, so this xtra cbl is 4 the "original" translucent one...
-
Using a JTV 69s, connected thru VDI --> Line 6 HD500, direct --> PA (2 channels, stereo).
Patch used 4 main riffs:http://line6.com/customtone/tone/408465/
This ***STEREO*** patch is expected 2 b played with a v2.10 JTV (Lester pos 1), connected thru VDI 2 a v2.31 HD500, XLR'd direct 2 PA (2 channels).
Set input1=variax, input2=aux.
It simulates the original LedZep IV studio version, where the guitars r heavily layered. 4 separate Jimmy Page guitar tracks were overdubbed. Page recorded the guitar directly in2 a 1176 limiter preamp (manufactured by Universal Audio), distorted the stages of it, and then sent that 2 a normally operating limiter. In other words, no-guitar-amplifier-was-used-in-the-recording-process!!!
In this live performance, 2 guitar tracks are implemented via the HD500 (left + right channels with 40 ms delay betwn them) and a third track is actually played by another guitar.
Enjoy !Patch 4 solo will b posted asap.
-
2
-
-
just guessin',
it appears that something "triggered" the JTV 2 switch tuning, so since u did not change patches thru the hd500, the only logical explanation is somthing going on with the alt-tun-selector...
-
-
-
-
consider forcing JTV standard tuning on ALL ur HD500 presets.
this way u practically elimimate the possibility of this strage behaviour happening again...
also it seems a sound idea 2 have ur tuning selector knob always @standard...
-
roger, got it...
-
glad 2 hear all went well...
keep on dream rigging...
-
clay--man, tks a lot.
john
-
it appeared to me that the extra cable was simply a usb extension cable...
very useful if your usb's are in the back of a desktop that's on the floor or behind your desk etc.
ok, but the extension cable must have 1 male and 1 female end.
as far as I can c, this cable has 2 male ends.
so,.. ???
-
ok, I understand.
however the q still goes on:
the dongle can b connected 2 the pc WITHOUT any extrta cable, can it?
and the xtra cable does not connect/fit/match 2 the dongle at all, does it?
so,
why do they ship the xtra cable?
-
just guessing, may b the switch lose "contact" with the model selector...
seems like u need a support ticket....
have u tried reflashing latest f/w?
-
...This also answers the question, "What is the USB cable for?"
what is it 4?
-
good luck my friend....
-
use hd500X Edit, type the exact value on the parameter-window 'n press enter!
voila, u r done...
or
select the appropriate value from the list...
further reading :
http://line6.com/support/topic/7352-delay-time-dialing-problems/?do=findComment&comment=51938
-
... USB connected to my PC - This was the main source of noise. After unplugging the USB from the HD500X, there was silence and the 4cm sounded pretty much like my amp. I tried several USB cords with the same results (they all made noise)....
Check out this one:
-
-
-
but with BY-PASS-VOLUME=0 u don't pass any signal at all thru the FX loop....
-
use DAW 2 record ur signal, 'n monitor levels.
suggested free recording tool : Audacity...
Help with gain structure noise levels
in POD HD
Posted
if u have a JTV, consider using the noise-free models....