Raphael26

The FX Loop is probably on the back - post a picture of the rear of the amp.

 

Otherwise, you can go right into the front, and set the HD to "Combo" in the output section of system properties.

I'm connecting with this form:

Cabling: Guitar in - My guitar

Cabling: R/Mono(connected)  1/4 OUT    L/Mono - Input do Amplifier

Setup HD 500:

Menu:  3/9 (Outputs)

Guitar + Variax Ch1 - this is the combo?

If the amp has an fx loop then you are good to go! If not, Guitar in on the HD500. Out of HD to fron of the amp.

I dont know what is fx loop rs :/ but i think that 4 cabling method do not works at this amp, cause it have 2 entries only. 

http://bimg2.mlstatic.com/amp-meteoro-atomic-drive-20w_MLB-F-3307491949_102012.jpg

Try This: 4 Cable Method

 

 

Cabling

Cable 1:  Guitar Out --> HD Guitar In

Cable 2:   HD500 FX Send --> Amp Input

Cable 3:  Amp FX Send --> HD500 FX Return (Left)

Cable 4:   HD500 1/4" Out (Left) --> Amp FX Return

 

Amp Settings

Master volume(if you have one)  = Low (for now, while you are setting up.)

Amp Loop Switch  = -10dB (Instrument level)

Amp Loop Turned on !

 

If the amp loop has a 'mix' control, make sure this is set to 100%

 

HD500 Settings

Guitar Input Pad = Normal (unless you hear clipping from your guitar due to very powerful pickups)

Master Volume = 100% (See the note about master volumes below)

1/4" Out Switch = 'Amp'

Loop Level Switch = 'Stomp'

System Output = 'Stack Power Amp' (within system settings)

Tks 4 th answer!

Dude, i have this amp http://bimg2.mlstatic.com/amp-meteoro-atomic-drive-20w_MLB-F-3307491949_102012.jpg

This method with 4 cables can be applied ?

Or exist other methods..

Hello,

I'm a new user of Hd 500.. how is the method to plug the hd 500 cabling in amplifier?

We have some options in right side of hd 500, like LINE or AMP - GUITAR or PAD.

What the diference? 

Help me!!

Tks alL!

Hello Dudes,

how can i record my guitar in computer?

tks all!!!

Post your other questions in a new thread here. That way you will get the benefit of many users' ideas and opinions.

Ok!

I'll play this weekend in a stage, but i can't found a distortion like deftones.

In really, i dont get create any distortion :/

Do you have some tip, some guidance?!

When the tuner is engaged the display screen will show the current calibration in Hz/Frequency. Turn the little black knob (I think it is knob#1)to change it.

Right, i'll try! Thank u, dude, very much!

Can i remedy some questions in a chat w/ u? I wanna know a little more about HD500. It's possible?

Check that the tuner is set to A=440. Also check that your reference is correct (whatever it is that makes you say the HD 'sounds like D').

Ok dude!

I'm a recent user of HD 500, do you know where i found the menu to setup "A=440" ?

The tuner has a calibration knob (A=440, etc.....) but it is a chromatic tuner. If you want Db, tune down from D until the display shows Db.

but when i tune Db, the displays show me correctly Db, OK is perfect.

But sounds like, D. The displays doesnt are ok. I think this would be regulated, or no?

Hello, 

Someone can help me with hd 500 tuner?!

I think it is unregulated, cause if i put Db, hers sounds like D.

Someone know how regulated the tuner??

thank u all!!!

Right, thank u very much!!

But, when i press the POST position, the effects like BASS, MID and TREBLE doestn work :// another form to solve this??

Hi!!

I need some help to record in my POD HD 500.

I'm recording some sound with CLEAN FENDER effect. Ok.

But when i change to DRIVE FENDER, my first recording (clean fender) starts to play with DRIVE.

Someone can help me please?? Need help!!!!

Thank u all!!!!!