Jump to content

joebar23

Members
  • Posts

    6
  • Joined

  • Last visited

Posts posted by joebar23

  1. Thought I would share my cable that I built to replace the cheap one provided with my JVT 89 Guitar.

     

    I got the Neutrik connectors from Parts Express www.parts-express.com   part # 092-181.  The cool thing about these connectors is that they can be installed on existing RJ-45 cables.  The actual cable came from Amazon.com listed under "Aurum Cables - Cat5e Network Ethernet Cable (75 Feet - Red Braided)".  I shortened it to 25 ft by cutting it and adding an RJ-45 connector.  Total cost was about $30.00.   It is much better than the supplied cable and works great.

    post-1758873-0-80257600-1368538990_thumb.jpg

    • Upvote 3
  2. I just bought a JTV-89 to use with my Pod HD500 - I updated all the software on the Pod and Guitar and It is a great rig.  I use the VDI cable because I want the guitar setting to be controlled by the Pod HD500.  I send a MIDI Program change from my sequencer and it sets up not only the Pod HD500 but the guitar also.  I just hate the cord.  I know I can use a guitar wireless rig thru the 1/4" analog output and get the sounds from the guitar but I do not get the control of the settings like you do with the VDI cable.  It is soooo easy to save a new Pod HD500 Program with all the Variax settings and when you start your new song on the sequencer, you don't have to touch any controls on the guitar.  Any plans on wireless VDI????

     

    Also, a while back I wrote to see if you could use the MIDI CC 7 (volume control) on the Pod HD500 and that was not implemented yet.  Does anybody know if that has now been implemented?  I would like to control the master volume of the Pod HD500 from the sequencer sending MIDI control signals.

     

    Thanks,

     

    Joebar23

×
×
  • Create New...