Jump to content

Tinyfireball

Members
  • Content Count

    14
  • Joined

  • Last visited

Posts posted by Tinyfireball


  1. Hi will have to open the processor .there are 4 screws at the back. inside there is a flesh in the panel it must be removed carefully wiped with alcohol or cleaned with a rubber band from a pencil so that the contacts glisten and insert it back should work . this happens in XT and XT live from oxidation .

    XT check.jpg


  2. Version 7.6.8
    Released 6/22/18 This update includes bug fixes and optimizations.

    Note that macOS High Sierra 10.13 has implemented a change to how drivers are accessed that may require your attention.  If you cannot use your Line 6 device after installing this driver, please see this article:  macOS High Sierra 10.13 Driver Installation Change

    Compatible OS: Mac OS X, Mac OS Mountain Lion, Mac OS Mavericks, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra, macOS Mojave I HAD SUCH A FAILURE , I THOUGHT USB CHIP BURNED FROM A HOT TURN ON (WHEN THE POWER PEDAL), BUT IT WAS NOT SO .I DOWNLOADED THE LATEST DRIVERS AND IT WORKED.TRY AGAIN TO PRESS BUTTON A OR B DON'T REMEMBER EXACTLY AND TURN ON THE POWER WHILE HOLDING THE BUTTON AND YOU WILL ENTER IN THE SERVICE MENU OR IN UPDATE FLASH AND USING MONKEY CAN LOOK AT THE USB OLD FIRMWARE


  3. H​I Gay! First make sure the pedal calibrated properly- you can do this by powering up with the
    "Bank Up" stomp switch held. This puts the unit into a special pedal calibration test mode.
    Press the "AMP ON\OFF" stomp switch to reset the calibration. Move the pedal to the heel position.
    Move the pedal to the toe position and depress the pedal toe switch.
    Move the pedal back to the heel position. When in the heel position now the "7MAPPEDxxx" number
    on the LCD should read 0.Move the pedal back to the toe down position (you do not have to depress
    the toe switch )the"7MAPPEDxxx" number should read 127.You should also see this number sweep from
    0 to 127 as the pedal is moved from heel down to toe down. Turn off the pedal , turn on and check
    pedal.

×
×
  • Create New...