Chuck_R
-
Posts
30 -
Joined
-
Last visited
Posts posted by Chuck_R
-
-
You're talking about controlling Helix from your DAW, correct? If so, then how you describe it is how it works. Just toggles. It would be useful to force a switch to a certain state, regardless of its current state. There might even be an ideascale entry for this. So this could be something, hopefully, that can be done eventually.
Thanks. I just found it and voted it up.
-
Same thing has happened to me several times running 1.02.2.
mcoffey
I had the black screen version. Had to reset to factory to recover.
-
Another Issue with MIDI implementation
When using MIDI events to trigger FS activation. Regardless of the data value in the CC message, the only thing it will do is toggle the switch.
I am building automated patches that change the preset and set specific footswtiches on for the appropriate tone and this won't work. When the CCs for the FS fire, the result depends on what the previous state of the switch was, it just toggles. I would think if I send a CC with 127 it would force it on, and with a data of 0 it would force it off. This just seems like obvious behavior.
-
MIDI Channel issue
Regardless of what channel I set the MIDI to on the Helix it responds to commands on every channel. It seems to be always in OMNI mode.
Firmware: 1.02.2
Helix Bug Reports
in Helix
Posted
Just had the black screen again. Seems to be a pattern when I am adjusting input and output blocks. In particular making some adjustments and then moving the cursor right from an output block to go to an input block. Doink. Hung and factory reset time. This is the second time this happened. USB was connected at the time. Hope this info helps!