Flotsam71
-
Posts
59 -
Joined
-
Last visited
Posts posted by Flotsam71
-
-
Makes sense...thank you for the reply. It's not that it doesn't sound great...I think it could be better! But that is the fun of it....typically the Laney's are 100% wet ..so they blend well in that situation.
-
I'm sure this topic has been beaten like a dead horse making scrambled eggs. But here's my question. I am running helix 4 cable method into a jcm2000 with 2x12 cabinet. Love it love it! Love it! I also use 2 Laney IRT-x's for a wet dry wet sound. Now here's my problem. I only play for me. I'm not worried about FOH or leaving my basement. So I am looking for that elusive amp in the room sound from the Laney's scince..I use them in conjuntion with an amp in the room. I dont want to sound like a miked cab...I want the wets to sound just like the marshall..To me cabs sound ok but muffled...i am having a little luck with the Celestian V30 IRs I just bought. I just thought I'd ask the group for any input. Thanks so much.
-
The black bar thing sucks!!! Get rid of it now!!!!!
- 1
-
-
I have the H9 connected to helix in stereo via loop 3/4 and midi cable. I thought the H9 book was pretty easy to follow as far as midi goes. Not sure about a video...but have done what you mentioned.
-
I believe and use a frown eq curve before tube amp 4 cable and smile eq curve right after.. tube amps want mids to push them...but I prefer a somewhat scooped sound post distortion.
-
I only play at home so I have no FOH opinion...but w/d/w sounds amazing to me. I'm using a Marshall via 1/4 out all dry...and xlr out to 2 Laney IRT-X's for a blend able wet. Path 1 is dry to 1/4 inch...split at the end to path 2 with stereo effects and cab block..and out to xlr. So many routing options I get a headache!!
-
He he...good one ..I like it!!
-
Not sure if this the place for such a comment...but I would love to see knobs in the editor instead of the sliders ..too big and cheasy looking. I hate scrolling down to see bottom parameters. I love the look of the eventide h9 control. Basically a sceen of the pedal itself. Love the helix otherwise!! Thanks
-
The performance switch is actually not a physical switch on the outside of H9..the only way to activate it is the app..midi..or analog switch..I'm using a MXR tap pedal.
I found this on the Eventide website that explains it perfectly....
If, via cc, I send 127 then 0 right away...it flips to slow. Then back to fast if I do the same ... 127 then 0. This I call a TAP of a midi cc button in gate mode..not toggle. On/off. Because in gate mode it sends 127 when I press, and 0 when I release.
If I HOLD that same switch, sending just 127....it goes to BRAKE mode..just while I am holding it. When I release...it sends 0, and brake mode is released.
This is normal function...identical to my analog aux switch mapped to the performance switch.
Also reminiscent of traditional Leslie controls on a Hammond organ.
The key is sending the right cc signals.
Your need for a double tap is because your switch is in TOGGLE mode, instead of an on/off gate mode..which is a limitation of some controllers...namely the Helix, as I understand.
...still love the helix after 1.5 years...H9 is just a great addition. Thanks you for this forum!
-
This post was a while ago I know...but thought I'd jump in since just bought a H9...just because I'm crazy and needed something new to play with!. Anyway I also couldn't get midi perf switch to work correctly. Found a post on the Eventide web site..which does work but is a little weird. Using a midi toggle...and dim to 0 and lit to 127. (Think i have those right..if not reverse them) You have to double tab the button quick to toggle fast/slow. Just pressing activates the brake. So maybe I'll just stay with the MXR tap pedal for perf switch. Save the helix switches.
-
Thanks guys...I'll post my results
-
Does any one if it's possible to use the amp 1/2 control switch on helix as an aux switch for the H9?? The H9 aux switch is a three way switch tip/sleeve/ring something....can't remember at the moment. I just need one thing activated. I don't use the amp/control on helix for my Marshall cause as most of you know...IT DOES>NT F-ING WORK!! I use midi for channel switching. I also use midi from helix for the H9 which by the way is amazing is stereo through helix. But I still want to control a feature not midi-able...does that make sense? Any advice greatly appreciated. Can I hurt anything by trying this?? Is it just a relay?? Can I fry the H9...or any other pedal by attempting this?? Thanks again.
-
Really...I'll have to try the tape thing...I bought the hifime usb issolater. NOT the cheap one!! Thanks for this!
-
There is a usb issolater you can buy. Can't remember the name of it...I've been using it for about a year now. Sucks cause you need the expensive multi channel one.
-
The terrible noise caused by having a usb lead connected when playing through my fx return.
-
I use mono 1/4 output to a Marshall jc2000 with 2 x 12 cabinet. XLR output left and right to 2 Laney IRT-X's for chorus, delay, reverb, so on. Sounds amazing and full...chorus the way it should sound!! Patches are very easy...
- 1
-
-
Loving the best of both worlds...not for the gigging musician however...im a basement guitarist. 4 cable to a Marshall halfstack...and 2 Laney irt's for wet dry wet...every option available.
-
I love 4 cable method...very simple to do and gives me every option. I am not a gigging guitarist so no moving of equipment. I also now have 2 Laney IRT-X's for a wet dry wet situation. So every option is available...stereo modeling...helix amps...my amp...yeah it's a lot of cables..but I can now use Helix at its full potential!!
- 2
-
I prefer to use pre amp models into the return of my jcm2000. 4 cable method works fantastic...A/B-ing my preamp with helix 2204 is amazing...very very close. I notice less gain using only preamp vs full amp. But more gain can always be achieved by cranking my poweramp!! I shouldn't call it gain I guess...more dirt!
-
Thanks for advice guys..I use send 1 to a Marshall return using line level. It has a button on the back for the -10 +4 deal. Send 3 and 4 are to Laney itr-x. Great wet dry sounds...just racking my brain on the best way to connect it all....
-
Hey guys another dumb question...should sends from helix to amp loop returns be line level?? I'm thinking yes...thanks.
-
That's the video I'm talking about... Around the 20min part I think..I understand all of it...just curious why the right output goes to AUX in instead of just return 3..thanks for all the replies guys!
2.80 Helix LT Update doesn't continue after Boot Failure message
in Helix
Posted
Doesn't work for me either....Anyone want to buy a dead helix?? I'm going back to analog!!!!!!!!!!!!!!