Please ensure Javascript is enabled for purposes of website accessibility Jump to content

EdwinV

Members
  • Posts

    101
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by EdwinV

  1. My thoughts exactly, but as PeterHamm already stated Line 6 has hinted that the update procedure will be improved
  2. You haven't mentioned which AnalogMan Fuzz you have. If it's a Sunface, the only way is to put it in front of the Helix. In the conventional setup you would also put this first in the signal chain after your guitar. It does work with few 'true bypass' effects in front of it, but will act strangely when confronted with a buffered input signal. The AnalogMan Astrotone Fuzz is supposed to be less sensitive to a buffered input signal and may work better in the loop. Haven't tested this myself though. If I have some spare time I may try this. I have several Sun Faces, Sun Lions, Astrotones and a Sunbender lying around. Really love those fuzz boxes, but the Helix is so incredibly convenient and sounds great too
  3. This! Another option may be the Alto TS210. Sounds good, lightweight and not very expensive.
  4. To the OP's question: I don't find the reverbs really disappointing It all depends on one's expectations and intended use. But I'm not much of a reverb corksniffer anyway; to me, reverb is OK when it's barely audible and you mostly notice it when you turn it of. Since we're paraphrasing here, I guess I'm more in the gearmanndude camp ("reverb sucks") 😜 In my pedalboard days (which I don't consider to be all past, though I've only been using it scarcely since I got Helix), I didn't even have a reverb at all. Now, I mostly use the plate reverb and sometimes the '63 spring reverb. For me they are absolutely usable. I'll trade any HX reverb for a fuzz face model with switchable trannies (Ge) or a Tonebender MkII any time! But as with anything: you can't please them all
  5. Select the delay effect, push the button that controls the delay time and it will change into 1/1, 1/2 etc. Then it will be controlled by the tap tempo. Cheers!
  6. Yeah, that's the right place. Before submitting, you may want to check if a similar idea has already been submitted. There is also a pinned thread "Helix Ideascale Community Submissions" where you can discuss your idea(s). But I believe that the Line 6 people mainly look at the ideascale site.
  7. Nice! Perhaps you can send it to Line 6 for while ... 😉 I've had the RE-20 on my pedalboard for quite some time. Loved the sound of the delay, but it had a sort of noise gate that I finally grew tired of. In the end, I replaced it by an AnalogMan ARDX20 (which is a great, no fantastic bucket brigade delay).
  8. I would certainly welcome a model of the Space Echo. Of course, I could run my Boss RE-20 pedal in one of the loops but I really like the "everything-in-one-box" thing of the Helix ...
  9. Sorry for the confusion; English is not my native language. I'm quite sure I didn't assign EXP2 to something else, but the "dropout" you're describing is exactly what I mean. The tone of the IR does not alter, but I did not expect this "dropout" when loading a different Mic model on a bypassed cab block. I would only expect to hear this when you're playing through this cab (when it's not bypassed).
  10. Yes, in series. The cab and IR were next to each other and had a footswitch assigned to both to alternate between them. FW 2.12 by the way
  11. Hi, I was comparing the new Allure IRS to the helix stock cabs, when I encountered the following: I assigned the EXP2 controller to control the microphone stock cab. I noticed when I had the stock cab bypassed and was playing through the IR, that it had an audible effect when I was changing the mic of the bypassed cab. This is no real life problem as I wouldn't do this while performing, but it didn't make sense to me. I reckon that this should not be audible when it's bypassed. Cheers
  12. Thanks! That helps a lot. Can't seem to get it sounding like that '57 Champ though ... Maybe that sound is in the fingers 🤔
  13. Excuse me to digress, but I'm curious how you're setting the drive, channel and master volume for this amp model?
  14. Curious if you are digging the Helix better now. Setting the IRs to 100% mix should help a lot (try what happens if you bypass them! - and do that on low volume). I must say that I don't understand that people immediately start with IRs. I think this only makes things more difficult in the beginning. The Helix has one of the best UIs I've ever seen (reminded me of the first iPad), but I certainly needed some time to get used to a modeler (though I had a POD 2.0 before). Having all these controls can be a bit overwhelming, specially for someone that came from a Marshall 2061X. I must say that getting an Alto TS210 helped a lot. That really improved the experience; though the Altos may not be the best that money can, I think they're more than decent powered speakers that really help the Helix experience. Cheers!
  15. LOL, that's a funny variation on a desert island rig ...
  16. Hi, You could do this in multiple ways and also depends on how you are using your Helix. One way would be to create parallel paths (1A and 1B), split them at the beginning of your signal path and have path 1A routed to your normal output. You can configure the output of path 1B e.g. to send1/2 and send that to your tuner. Hope that helps!
  17. I already knew the Helix can do much, but that's truly amazing. However, I do agree with PeterHamm that this is a risky setup for gigging. Although my Helix has been very stable, your whole setup would depend on the Helix. I wouldn't go out without having a backup Helix in your case ...
  18. That's interesting; I can't seem to remember reading this in the release notes. Did I miss something? How did you find out?
  19. Sorry, but is the Helix not just doing what it's supposed to do? With a normal pedalboard, the behavior would be exactly the same. The trails are feeding into everything downstream and whatever you turn on there will affect (effect 😉) your signal. If you don't want that, you may try splitting the last part of your signal chain (into A and B path, one delay in A and the other in B ). Maybe I'm silly, but I wouldn't want this to be "fixed" ... Cheers!
  20. Mostly, I use the Transistor Tape Delay. I also like the analog and the Adriatic delay. But I like the delays to be relatively subtle, so I set the mix to 15 - 25% after the cab block.
  21. I'm not very much into urban legend stories, but I do have the idea that in general it sounds better with 2.10 than 2.01. Or to be more precise, it sounds more like it did with 2.00 (and before). With 2.01 I noticed with some amps a bit of unpleasant distortion that resembled a bit a torn speaker (digital distortion?). One of the amps that suffered much from this was the bassman. I perform all updates exactly according to the instructions and fully restored all presets and - where used - the IRs as well. I even repeated the firmware update but that didn't help. With 2.10 it sounds as it used to do. Perhaps I had some kind of glitch with 2.01. Doesn't really makes sense to me. The dual rec doesn't get much playtime in my setup, so can't comment on that. Personally, I like the PRS clean amp and I really like the Litigator. PRS lead is not my cup of tea. Whether you want to update or not is entirely up to you. I have also read about issues and one that I also had was the one with the expression pedal. Was able to solve that by following the procedure described in this thread: http://line6.com/support/topic/24048-fw-210-expression-pedal-question/ Posts #4 and #18 worked for me.
  22. I tried it and I like it very much. It has very nice sparkling upper mids as well as some kind of clarity to it that's hard to describe. Still has a nice bass response. Haven't been able to get close with the Helix 2x12 silver bell cab (it's clearly similar, but not quite the same). Now I'm tempted to one of your 3 Marshall bundles, but which one ... 🤔 And I am bit reluctant to checking out >1900 IRs, but maybe as you stated one can just start with the "Multi" IRs.
×
×
  • Create New...