dannepop

This is my favorit! Listen to his youtube channel! 

He make great presets as well!

https://www.scottminchk.com

D

Thanks for the advice with a compression after the cab to get a long sustained tone.

I have always thought the string tone was to short on all the amps but this solved the problem!

Great!

D

Smile!

I did follow the release note!

I know what my problem is. It´s some user presets that dosen´t work with 2.81.

And I´m trying to pinndown the presets I need playing. 

Then I will load them one by one and see were it goes wrong.

Somewere in the top of this forum it says that it could be problems

with downloaded presets and the Line 6 will not deal with that!

So it´s up to me to get it to work!

I will also try to rebuild the presets that is the problem if I need them!

But right now I haven´t got the time for this tedious process and is content with 2.71!

D

1 hour ago, DunedinDragon said:

Has anyone else noticed the consistency between people that haven't had any problems having a long history of posts on this forum, and the ones that have had problems having a very limited number of posts?

I really don't think 2.81 is the problem.....

Oh that is my problem! I have to post more in the forum then my 2.81 problems will go away!!

Thanks for the advice!

D

Wait!

6 hours ago, keno657 said:

I'm getting a similar issue with my helix lt. It only happens in one patch and in the duplicate of that one patch.  Everything operates just fine untill I try to change Snapshots. Then everything freezes. I don't get a black screen, but I am unable to do anything else.

 

This happed three days after updating to 2.8.1. I restored a backup of my patches from before the update but still having the same issue.

 

Going to try going back to 2.7 and see if that's makes any difference

Yes, I did solve all of my problems with going back to 2.71!

Everyone says that I can´t follow the instructions when I update to 2.8!

Then how is it that 2.71 works great!

It´s a wondeful world of guitar electronics!

D

Thanks for your thoughts!

I´ll go with the 212 plus when it´s released!

Despite it´s overpriced!

D
 

What is the best way to go?

Firehawk 1500 or PowerCab 212 plus with Helix?

Seems like the Firehawk is cheaper, but what´s the difference?

D

Had the same problem.

Important not to reload the globals when loading userpresets!

Now it works!

D

We are so many that have problems with the 2.8 update! 

I got a support ticket with Line 6 and they are doing their best.

I thought I got the solution the other day with using the proper usb connection on my computer.

Thought it was the Helix Edit that was the problem but no.

But at rehearsals the other day I got problems again. Just by switch back and fouth between presets the problems occured again.

What is the safe firmware?

How do I do to go back to an earlier firmware?

I never had any problems before this update, hope for a new firmware as soon as possible!

D

That´s a Helix guy doing this!

D

Have to add that I only restored my User presets and IRs after this.

D

Think I did wrong on two points. First my usb-connection was via my Apple screen and second I followed a wrong factory reset instruction. I choose the wrong buttons to hold down on restart. The right ones was 9-10. At first I did the 7-8, which was wrong. The long install instructions did make me lost I think!

D

Yeah! I finally got it to work!

With the help from the wonderful support staff!

Thank you all for your support here at the tread!

All your cheers and hugs helpt me a lot!

D

19 minutes ago, phil_m said:

Have you tried to doing a factory reset? If you have a backup that you can use, that's what I'd suggest.

Yes, I did with no luck!

How can I go back to 2.80?

D

The thing is that all these problems occured with the 2.81 update!

It can´t be a hardware problem.

But I´m seriously getting tired of all these problems.

Perhaps go looking for a more stable brand!

D

It dosen´t matter how I set them.

Right now it´s like this.

Preset Mode = 8 presets

Stomp Mode = 8 switches

Snapshot Mode = manual return

Danne/

In Helix floor I can´t get the stomp mode when pushing right upper button. It always says CANCEL and don´t work!

When I switch presets I can only see snapshots! The pushing of both left buttons at the same time nothing happens!

This is with the 2.81 update!

Danne/

I opened a support ticket!

So now you could all cool down!

D

No I didn´t!

I sure they are aware of this!

That´s basic use of the software!

Everyone be cautions about using the Helix Edit!

Danne

That´s a buggy software. Just tried to copy one delay block to another place just before that. It ended with all of my clean snapshots got distorted!

Tried to save all with no overdrive. But the distorsion was still there!

Just got tired and reloaded my backup again and it works as expected.

My decision is to not use the Helix Edit software when editing my sounds!

Just go with Helix alone!

Danne

Why should I use a power amp before I run the Helix into the L3t?

What´s the benefits of this?

What power amps would be the best choice?

D