Jump to content


  • Content Count

  • Joined

  • Last visited

Posts posted by Sacco_Belmonte

  1. Nevermind, I fixed it.


    Opening the transmitter was a breeze knowing there was a screw in the back of the sticker.


    Upon inspection, nothing was clearly bent, but I decided to lift the metal tongue that touches the pole because it might be a bit misaligned. By lifting I mean centering it around the pole by carefully wedging it up. It seems like the tongue was a bit misaligned, by a nanometer or so.


    I had one go at it, clearly something aligned because the unit now works as intended. Like brand new :D 

    • Upvote 1

  2. I bought a second hand G10


    Seems like a slightly newer model, as the base LED is much brighter than my first unit.


    The transmitter it came with however, has a very flimsy activator pole (the small pole button near the TRS plug)...just a slight touch activates it and stays on, another tweak at it and turns off and so on...basically unreliable when it it comes to turning off.


    Does anyone knows why? Like a common cause and how to fix it?


    The unit seems ok, no signs of abuse or scratches. Maybe someone knock it while in the guitar, or dropped it, I don't know.


    Also, another side symptom of the loose bit is that sometimes the transmitter doesn't start charging. Is not too bad, I found its quirks, but would like to fix the transmitter.

  3. Hey guys. We'd be interested to know if the issue is resolved by using the adapter pointed out in this article: http://line6.com/support/page/kb/_/live-sound/relay-digital-wireless/relay-g10-guitar-compatibility-fitelectronics-r817


    the angled metal one works on all my active guitars. the only real problematic one is my shadow system for maccaferri guitars. the circuit box has the plug on it and the transmitter being so close induces noise. For that you'll need an extension cable to put it away or just use a regular cable. Besides that all my active acoustics work, also my ATG equipped guitar.


    I suggest you to buy 2 or more of these plugs, the male plug part is inserted into the female cylinder and is not soldered. So one of them already came off.


    I bought some more for that reason, and I'm gonna try soldering one to see if it helps.

  • Create New...