Jump to content

Memyselfniii

Members
  • Posts

    3
  • Joined

  • Last visited

Posts posted by Memyselfniii

  1. So with the HX is it possible to run separate lines both with their own parallel 50% dry 50% wet mix? Basically like one guitar player is going in his own effects chain and the other guitar players going into a separate effects chain each of those effects chains are running 50% dry 50% wet internally inside the HX.

  2. 4 hours ago, VirtualGuitars said:


    See attached.  Path 1 uses FX Loop 1 and Path 2 uses FX Loop 2.  All of the blocks before the FX Loops (Paths 1A and 2A) goes in front of the amps and all of the blocks after the FX Loops (Paths 1B and 2B) goes into the amp's effects loop.  I changed my output setting to 1/4" so the audio will just go to my amps; however, if I was recording or also wanted the audio routed to my studio monitors I would set it back to the default output of Multi.

    7CM.png

    Is this for the HX effects or Helix? I thought the HX edit software isn't available for the HX effects only unit yet? Just making sure that this is doable on the HX effects only unit.

  3. On 3/9/2018 at 8:02 PM, VirtualGuitars said:

    I use two Marshall UK tube combos (Silver Mini Jubilee and JTM312) with the 7-cable method and I couldn't be happier.  See attached.

    post-2630986-0-18533100-1520643718_thumb.jpg

    Can you show a screenshot of your 7 cable signal flow or upload it somehow? Is it possible to run your dry guitar parallel inside the hx and also run 7 cable method? 

×
×
  • Create New...