Helix as a “mixer” in Helix Posted May 28, 2020 22 minutes ago, rd2rk said: Here's a new version of the previously attached preset/template. The high dsp guitar is Path 1A and the lower dsp MIC is Path1B. Path 2A is Bass and Path 2B is for your Digitakt. If you take a MONO Out from your Digitakt into Return 1 it can be recorded from USB 5, and a MONO out from a Synth into Return 2 it will record from USB 6. You now have a recording template for a 5 piece band, and I haven't used a single block for routing. Tahiche3.hlx 12.03 kB · 0 downloads Thanks, will check it out. Don’t mean to sound ungrateful, but I know this is possible, it’s just the issue with presets... it might seem trivial but it’s a bummer for me. Recently i had a band where I’d use 3 inputs in every preset. 1a and 1b for guitar, 2a for bass (vía octave raro send/return) and 2b for vocals. It worked fine, but I couldn’t fiddle around presets, I couldn’t just pick a nice sound and keep it cos I needed to rebuild the other paths and rearrange everything, Yes, I see it’s probably unjustified wining. in my case, start the digitakt and be able to hon through presets and keep hearing the digitakt. Making the returns “audio through” is a stupid idea?. Seems like we all have that one thing we just need and no no else does :) in a different post I talked about a feature that I think is missing and that is present in, for example, Voicelive3. A way to have some “global” or default settings. Anyway, thanks a lot for your comments!. On a side note, I’m still thinking about going for the stomp + mixer. I’ll probably hate myself when I experience the 6 block limit, but the Helix is just overwhelming on my bedroom table. Gonna check out the patch. Thanks again.