Jump to content

woffles

Members
  • Posts

    12
  • Joined

  • Last visited

Posts posted by woffles

  1. 3 hours ago, voxman55 said:

    Hi Bruce, in your set-up you have 5 components, and it's a case of troubleshooting to find which one is the cause (- it's up to you re the order you want to check things and my order below is simply a suggestion): 

    • PodGo
    • PRS SE 24
    • Headrush 12
    • Guitar cable (Guitar to Pod Go)
    • Speaker cable (Pod Go to Headrush) (NOTE: this should be an unbalanced cable, NOT a standard balanced guitar cable)

     

     

     

     

    You got the one thing backwards.  The cable from the POD to the HeadRush should be a "balanced" cable instead of a guitar cable.  It's the stereo type.

  2. 6 hours ago, Kokavic said:

    Hello everyone!

    I am having the same difficulties with my POD Go connected via USB - I am new to DAW, recording, and the little POD Go beast, so I guess I am the one doing something wrong. In any case, I could really use the help! It happens when I try to record both, guitar, and bass. Especially with this last one.

    I am using Reaper as my DAW. I configured the ASIO, firmware on POD is updated, and everything should be set correctly I believe. I have set volumes max everywhere just to check (POD, guitar/bass, computer, etc) and while I get a somewhat ok volume when using the guitar with any distortion preset (feels it could still be louder the signal), when I use any preset with clean guitars, it sounds really quiet/low whatever I record. Same happens with any bass preset I use.

    Any ideas of things I should check? I really don't think the device is faulty, but I'd be really happy to have this functioning correctly :)

    Thank you!

    PS: Sounds perfect when connecting to speakers, monitors, amp, etc, just a low signal when recording.

    Are you turning up the USB setting in Global settings?  You can increase the USB output.

  3. On 9/21/2020 at 9:16 AM, silverhead said:

    It isn’t there because it makes no sense when you’re dealing with a static memory space. The device has a fixed space of internal memory for a fixed number of presets. There are always exactly that many presets stored in memory so conceptually you can’t ‘delete’ one; it’s memory space remains.
     

    What you can do is overwrite that preset space with a different preset definition that you consider to be an ‘empty’ preset. The New Preset that appears in the factory presets is an example of an empty preset.

     

    3 hours ago, phil_m said:


    There’s no such limit with POD Go Edit. You can install it on as many machines as you want. You do have to sign in the check for update, but your POD Go doesn’t technically even have to be registered in order for you to update it. The sign in process is really there to authorize any purchases made from the Marketplace.

     

    I think what the limit is then is that you have a limited number of computers you can download purchased licensed stuff from the Marketplace.  I remember reading a limit on authorized computers for something while installing.  I would agree you can run on as many as you want but I believe the licensed stuff is limited to 5 authorized computers.  You can just unauthorize one and add another if you need it on a different one I believe as well.

  4. 13 hours ago, phil_m said:


    What do you mean by authorized computer? There’s no authorization requirement to run POD Go Edit.

    I believe you are allowed to run the software on 5 computers?  If you want to check for updates you have to log in to do so.  Whatever the number is those computers have to be authorized to run the software.  It’s part of the install.  

  5. Wow, that was fast?  After I posted it I went ahead and submitted a ticket with the same question to get an "official" answer.  Support just replied back that it should be any issue other than an extra exposed jack hanging out on the back of the unit.  I tend to slide this forward on the carpet where I play and sometimes the jack starts to come out.  That issue just went away.  Also zip tied the power wart to the outlet so it won't fall out.  

  6. My headphones have a small jack that fits into the 1/4 jack.  I'll probably need to ask Line 6 but would it seem like an issue to leave the large jack plugged in all the time?  That way I could zip tie the power cord to it so it stays nice and tight?  I can just plug the headphones into the 1/4 jack as needed when I'm using them.

  7. I was wondering why the colors differ in each category for pedals?  From what I’ve found it means the pedal is either an hx or L-s/L-m type pedal.  Not 100% sure what that is telling me?  Does that mean the darker pedals are Helix pedals and the others come from different models?  Any good insight into this?  Do the hx types have a higher quality?

     

    Thanks

    Jef

  8. 10 hours ago, silverhead said:

    It isn’t there because it makes no sense when you’re dealing with a static memory space. The device has a fixed space of internal memory for a fixed number of presets. There are always exactly that many presets stored in memory so conceptually you can’t ‘delete’ one; it’s memory space remains.
     

    What you can do is overwrite that preset space with a different preset definition that you consider to be an ‘empty’ preset. The New Preset that appears in the factory presets is an example of an empty preset.

    Yeah, just copied a blank preset and pasted it over the ones I wanted to remove.  After that I just dragged them back down out of the way.  Works just fine like that.  Still learning the interface.  New to this modeling stuff.

  9. Was working on a tone this morning just still learning.  Had two tape delays in it which pushed it to it's limit a bit.  Tried to add an IR but wouldn't take.  Wasn't using the EQ so switched it to the tilt which I though would be lighter than the default and was able to add the IR.  Tape delays aren't doing much really, more to add dirt in line like old recordings to tape, watching a guy on YouTube doing a Beano sound.  Sounds pretty close to what he got working.  

×
×
  • Create New...