I just purchased from a private party the Spider V60 MKII amp that came with a Line 6 G10T.
After installing the new firmware for the amp and relay I began encountering this same issue.
I tested the relay on my Traveler guitar (EG-1) , Ibanez semi hollow body (AGS7T), and LTD bass (B-404), all have the same hiss.
Using a regular 1/4" mono cable I didn't encounter any of these issues so I'm sure it is the G10T relay.
Notes:
-The hiss is much worse on presets with higher gains.
- Any sound that uses "drive" has a hiss.
- lowering the drive volume completely eliminates the hiss when using the G10. Of course that also completely eliminates the distortion so it's not a solution.
- I noticed it on several of the chorus presets as well.
- WORKAROUND?
-lowering the drive completely and then gradually raising it you can find a level just below the preset drive level that doesn't have as bad of a hiss.
again this isn't really a fix since you won't get the sound you are looking for without the same level of gain..
Continuous High Frequency Ringing G10 Wireless
in Relay Digital Wireless
Posted
I just purchased from a private party the Spider V60 MKII amp that came with a Line 6 G10T.
After installing the new firmware for the amp and relay I began encountering this same issue.
I tested the relay on my Traveler guitar (EG-1) , Ibanez semi hollow body (AGS7T), and LTD bass (B-404), all have the same hiss.
Using a regular 1/4" mono cable I didn't encounter any of these issues so I'm sure it is the G10T relay.
Notes:
-The hiss is much worse on presets with higher gains.
- Any sound that uses "drive" has a hiss.
- lowering the drive volume completely eliminates the hiss when using the G10. Of course that also completely eliminates the distortion so it's not a solution.
- I noticed it on several of the chorus presets as well.
- WORKAROUND?
-lowering the drive completely and then gradually raising it you can find a level just below the preset drive level that doesn't have as bad of a hiss.
again this isn't really a fix since you won't get the sound you are looking for without the same level of gain..
Any tips would be appreciated.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Also I should note that the G10T does not accept a signal from the Traveler guitars internal sounds ( CLEAN, DISTORTION),
instead a green light will continuously blink.
It (G10T) will only work when the selector on the Traveler Guitar is in the "off" position.
A regular 1/4" mono cable will transmit the internal sounds to the amp ( Spider V60 MKII).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------