Romanoz

I forgot to mention that I am using the HX stomp

Is it possible to use for example only the left switch to change between Snapshot 1 and Snapshot 2 and back (so that every time i push it, it changes to the other snapshot)?

I would just need that option as while i am singing i can keep my foot over one switch (but i am not that gifted to look for other switches while singing  ;-) )

Thanks in advance for any advice

Is it possible to use for example only the left switch to change between Snapshot 1 and Snapshot 2 and back (so that every time i push it, it changes to the other snapshot)?

Problem solved: I assigned the Level A and Level B at the A/B split to the snapshots respectively. And it works.

Thanks for your inputs.

Cheers

Hi there,

I play with my guitar signal splitted to two amps and i occassionally switch one path off during songs. I am currently testing the STOMP HX to see if I can replace my amps etc.

Soundwise I am fully convinced that it will do (and that was the part, i thought might be critical).

As I have read that the change of preset causes interruptions (although even my StoneAge FloorPOD does not)  I used snapshots (which should do it without problems, according to recomendations) to do the switching: I have a preset with two paths, each ending with an amp/cab. Now with snapshot 1 Volume on on both amps, with snapshot 2:  the volume of amp A is turned off  and volume amp B on, snapshot 3:  volume on amp A is off and volume on amp B is on.

With this setting i have a massive glitch while switching the snapshots - needless to say that I can't use it like this.

I was blown away that i was able to dial in a sound which mimics my current live setup in a second. I can't believe that device is not able to do that simple switching and i have to send it back. I think there must be a way to solve this. Help would be very much aprecciated, as I would really like to keep it.

Thanks in advance