Contrary to earlier indications, and even with the updated Firmware 1.03 installed, the G10T has twice again exhibited the Blinkng Green LED symptom. This after reaching a full charge solid green LED, and the G10T remaining in the base, and the power to the base then turned off. The LED remains solid green after power down and begins blinking about 4 minutes later. It continued blinking overnight until the following morning (about 9 hours). [More details are provided in the support ticket for this issue.]
Did this ever get solved? I haven't used my G10 in over a year. Just got it out and got all of the firmware up to date and now the G10t constantly blinks green. Doesn't matter if it's in the receiver, guitar, or out. The only way I got it to stop was to keep it unplugged from the receiver for 4min so it goes into sleep mode. Then once I plug it in to the receiver the cycle starts again. Constant green blink.
G10 Firmware 1.03 fix blinking green after base power off?
in Relay Digital Wireless
Posted
Did this ever get solved? I haven't used my G10 in over a year. Just got it out and got all of the firmware up to date and now the G10t constantly blinks green. Doesn't matter if it's in the receiver, guitar, or out. The only way I got it to stop was to keep it unplugged from the receiver for 4min so it goes into sleep mode. Then once I plug it in to the receiver the cycle starts again. Constant green blink.