-
Posts
761 -
Joined
-
Last visited
-
Days Won
5
Posts posted by toneman2121
-
-
-
to quote another WOW :o
-
-
-
i still think vinyl is better than cd's. i don't care what anybody says. :angry:
-
that console tv 4 rows down was in the living room! how 'bout that?
-
-
They could have a great market going with PRS SE + Variax, considering they are made in the same factory!
change prs se to prs/usa and you got a deal :)
-
http://www.univox.org/pics/catalogs/1965_amp_catalog3.jpg
the amp on the left is my first. don't ask me what happened to it. my old man got it for 50 bucks. and it wasn't even my birthday
- 1
-
still using the xt? you should step up to a hd or an axe fx or a kemper
-
'"Rolled back to 1.10. It worked, fixed the overdub problem. But when updating from 1.10 to 2.20 I got reboot cycle."
global reset after each update
-
1. usa jtv
2. usa prs very very very very ...very close 2nd
-
thank you i'll check it out
-
well my opinion is, albeit i'm practically deaf in the mid and upper register frequencies, i can still hear them; i had to increase the mids for your solo to come through the mix. i believe the solo has to be more up front. i didn't have this difficulty in your previous recordings. maybe it's just me. i like the intro very much. and the couple of times you plucked a note and slid back up the neck was cool as hell. the arpeggio sequence is really tasteful, not just hundreds of notes strung together. one of these days i'm gonna learn to do them. excellent piece. B)
-
what programs might they be. i'd like to expand the edit window to fit the screen
-
-
my thought is yeah but the window can't be re-sized so it might not fit
-
i don't have any personal insight on the subject but the manual gives a rudimentary explanation
-
make sure you do not get any of the steel wool inside the guitar. I'm sure it can short circuit it if you do.
I suppose it could...if wou wedged an entire pad of the stuff in next to your switches and pots, but I don't think the little shavings pose much of a risk. I've been using ultra fine steel wool to get crud off of fretboards and to smooth the backs of necks for years, and never gave it a second thought....unless you have the pickguard or backplates off at the same time, it's nearly impossible to screw anything up. And even then you're using it on the neck.
the point is moot because i read the post as if he wanted a smooth matte finish, instead of glossy. like i said, i need to start wearing glasses when i read this forum
-
go to your account page
-
yeah, that works well. been doing that for years. I don't think the OP likes the satin feel though...
man i gotta start reading this forum with glasses on :blink:
-
get some 0000 steel wool or even some very very very fine sand paper and make it silky smooth :)
-
try reflashing the firmware
-
This happened to my Pod HD Pro after a flash update. Mine has to be a software thing. It won't even reboot. It gets stuck on start up with no output sound. I don't know why I even tried to flash it. Guess I have to send it in.
usually a global reset fixes that
Authorization And Lifetime Devices Issue
in Computer Audio Setup and Troubleshooting
Posted
follow the link above