titchyblackcat

Thanks Phil

I've just got my Pod HD so i'm in learn mode.

Sometimes i have my guitar straight in and other times i may have pedal in front of it.

I'm trying to match some tones to my new Pod Hd.

Does anyone know what the input impedance of a Pod v2 is please.

I was thinking maybe start with just the input to the Pod

If you have a pedal in front of the Pod then there's no way of knowing if you have the pedal turned up too much.

There's some other threads about this further down the page.

I think an idea for future HD Edit that i use on my pc is to have An input and an output meter.

They don't have to be totally accurate but would be good as an indidcator.

There's a lot of people seem to be having trouble with clipping and other

unwanted noise which is all about checking your whole signal flow.

I've tried this and the latency was too much.

I think it's because ASIO uses one device so that it can monitor the input and output.

By monitoring the input and output that way the DAW can then synchronise the 2 so they are usable.

Remember Cubase reads ahead to try and minimise the latency.

I still use a M-Audio sound card for recording/playback and the USB just for the LIne 6 Edit

I can't open the downloaded file for windows. It says it's not a win32 application.

I downaloaded the file and then double clicked on it. Is that how you use it ?

In compatabilty mode that takes it backwards to previous OS software ?

I'm running XP. What was the converter written for ? Windows 7 ?

I couldn't get the convert software .exe file to run.

The error message says it's not a win32 application file.

Or is there a way to make it run ?

Brilliant.

Thanks very much guys.

How do you use the converter ? I downloaded it and an error message says it is not a valid win32 application.

Does anyone have the Pod HD Dual Tones Bundle that came installed on the HD500

I'd like this on My Pod HD but it has a different list when you do a factory reset.

Someone has also come up with software to convert between the different HD series files so it should be OK.

Thanks for your help, I was hoping that would be the case as i'm going for a clean but "BIG" rythm preset.

Thanks duncann, I'll have a few hours at the week end to try it out.

Can I record the using the Audio outputs one type of amp on the right and another type of amp on the left ?

I have a Pod HD desktop to use for recording to a pc

My usual input would be

1. Strat' straight into the Pod

2. Les Paul straight into the Pod

3. Either of the above but with an FX pedal between the guitar and the Pod ( Maybe a Wah)

The questions are

1. Should I use input 1 guitar and input 2 the same ?

2. Which impedance setting is the best ?

3. How do I adjust the global tone using the Edit on the pc ?

Thank You.

Do i need just the latest updates or dl i have to load all the updates in sequence from the last 4 or 5 years ?

It was Java. Thanks for the info'

For anyone else that reads this what i did was.

Uninstall both Line 6 Edit and Java.

Up load latest version of Java first followed by Line 6 Edit.

This sorted my comm's out fine.

Once again thanks for the help guys. :)

OK Thanks i'll update Java.

As the machine isn't on the internet it could be an old version on there.

I'll let you know in a couple of days as i don't have a lot of time at the moment.

Pod 2.1 goes to the midi on the sound card there's no usb.

On the M-Audio sound card there are 2 midi connectors so i think the connectivity is OK.

Also this set up works fine with my Tonelab so i think the midi link is OK

Seems to be a bit quicker with Line6 Edit 3.0 but won't exit without Taskmanager.

Sorry .

The pc is running xp and is connected to the Pod 2.1 with 3m MIDI cables.

This goes to an M-Audio 2496 card in the pc.

The pc just hangs (freezes) for a minutes or 2 sometimes or. just hags until i use taskmanager to exit

I've tried Line 6 edit 3.06 and 3,04 so far but they seem to do  the same.

I have the same thing on my mine. Did this ever get resolved ?

The Edited light comes on when The Pod is switched on where nothing has been edited.

I've an old Pod 2 with 2.1 software and seem to have trouble with the latest Line 6 Edit being a bit haphazard. (Comms and Settings)

Is there a recommended old version of Line 6 Edit that may be better for this old Pod ?

Almost as the other thread.

If i turn onthe Pod 2 and say use 4D (Hi-gain) it sounds like (mushy digital distrtion etc. almost like a very bad synth')

If i do a factory reset and then set the tone up again for me it sounds great. But, if i turn the Pod off and on again the tone is once again awful.

it's as if something is happening to make it do this in the memory storage.

It is version 2.1 of Pod 2 (original type)