titchyblackcat

Thanks, Ill just ignore for now.

No, still says 6 of 11 lifetime activations.

I've just seen this as i have just bought some presets from the marketplace.

It says i've used up 6 from 11 lifetime activations.

Well, 5 of them are old machines that have been thrown away

So if i deactivate all my old computers on the line 6 web site from the list will it start at 10 ?

Thanks for the replies. Sounds like I'm doing this all wrong, I'm after a massive big stereo sound for recording.

Are there any idiots guides to this ? every one seems to know what they're doing apart from me.

Hi

Is there a rule of thumb way for setting the volume and delay of dual cabs for stereo.

Sometimes my perception is one side is louder than the other but then it seems to move at other times.

I'm toying with a 5 ms delay on the right hand cabinet at the moment

OK Thanks for the replies. It's a good job i've kept my old Pods.

Thanks for the replies. Reset 9 + 10 did the job.

The display has blank boxes, before, the boxes  had preset information in them.

Hi

I have a dodgy looking display on my Helix LT.

Which reset does the whole machine. I've backed up everything using the edit

Just trying again this morning. im recording on a pc so, the helix output goes to a Native instruments KA6 Audio interface

The guitar is a les paul traditional the blocks are tube drive and devided duo.

input is guitar in with a noise gate and the output is 1/4 jack.

All Settings Are The Same.

Thanks for the replies I'll get back tomorrow. I didn't list any amps/cabs etc so as not to confuse the problem.

As i said everything is exactly the same on the Helix as the Pod HD. I spent a bit of time copying the setting.

The guitar and audio interface are exactly the same. It's just the sensitivity

Hi,

I'm playing a patch on my Helix LT that was copied from my HD Pod.

The noise of me sliding my finger on the fret board for example is very noisy.

Even if I slightly knock the guitar its the same.

On the HD Pod i can do the same and it's noticable how quiet it is.

Any help please to quieten the Helix sensitivity.

Thanks, everythings backed up. Ive even got 2 original pods in case one breaks down.

OK Thanks. I've pressed home and it's still the same empty boxes i'll do a reset.

Hi

Ive just started up my helix LT and the display doesn't seem to be correct.

Normally it has 8 presets but all i have is 8 empty boxes

Any ideas Please ? It seems a JPG file is too big

Thanks All. I'll try the suggestions.

10 hours ago, Hey_Joe said:

You can just change the input to your non Variax guitar and use the signal chain as is.

It should work just fine unless the Variax has parameter assignments to control any blocks in the CustomTone preset(s).

I tried that and the presets sound awful.

7 hours ago, codamedia said:

 

If I were looking to replicate those tones I'd reach for the AC30 Fawn Normal... 

Thanks, Ill try that first.

Thanks, most of them are for variax so, i thought i'd try and make one of my own.

Hi,

I'm trying to get a Beatles Vox Tone, the question is.

Which Vox on the Helix would be closest to the Vox that The Beatles used ?

Thanks for the reply. I opened it up to make sure.

It doesn't have a battery.

It's only new presets.

Found it !

Where will I find a gain block ?

Many Thanks, I'll try your suggestions guys.

LT sounds best for your needs.