titchyblackcat

I have a Pod HD directly into the pc and have some OK tones with my Tele' and Strat'

My Les Paul Traditional  has never sounded very good so i wondered if any one had any different tips ( like Bass at 0 and resonance at 0 etc) for a Les Paul.

Whether it be clean or crunchy I'd appreciate any ideas like which amps to try and nuances that would apply to a Les Paul.

Thanks Joel.

There's only a couple i'd like to transfer, I don't think i've spent enough time with the HD yet.

I agree i use them sometimes to save flicking between different screens.

I use Prt Sc and C on the keyboard then open  Accessories - paint. Once open just select new and then paste.

This then enables you to print the page from there. I've also printed maybe a page of a manual so i can have the program open on the pc and not have to keep changing it for a pdf.

OK Thanks guys i'll get tweaking.

I use the output jack sockets so that i can use another interface ( in your case the UR22) else you have to ditch the UR22 and use just the Pod.

You can only use one or the other as the ASIO needs to stream through one device to keep the input and output in sync.

To me that's not practical with all the other equipment i've got so i don't bother recording with USB.

Hi

I've some good tones on my Pod v2 that I'd like to have on my Pod HD.

To do this i've done a screen print of a patch and dialed in the same values on the HD.

The question is which mic' setting would be closest to the v2 as it didn't have the option to select a mic'

I'm hoping someone may know how the original sounds were written to the v2.

Many Thanks Meambobbo.

Many thanks to hurghanico for doing all the hard work. It's a bit rotten you've not been given credit for this.

Also thanks to Dutchguitarist for putting the file here for me to download.

I'm just trying out  the extra model packs for my HD bean.

Is there a gallery anywhere to tell me a bit more about them ?

There's a couple that i haven't a clue what they could be.

Thank You.

Clears up another little mystery for me.

What I mean silverhead is, when both paths are sent in full stereo are the jack sockets stereo ?

If the paths are sent as stereo I'd expect L to be stereo out and R to be stereo out.

I think they are both mono  jacks which is how I use them at the moment.

Are the left and right outputs of the bean stereo or mono ?

Each channel is stereo so i'm not sure if you could dual amp out of the bean in stereo.

As i'm still learning i've been using the outputs by using mono jack (left and right) to my M-Audio sound card.

To be honest i've literally just messed about until it sounds OK.

Thanks for the second link i'll try using that when i get time.

Thank You.

Where is it ?

When i look at the Customtone patches, in the amp description column sometimes there are numbers instead of the amp description.

For example 458843 is one. Just wondered what and why  this is ?

Thanks I've got the lot so there's a lot of twiddling to be done.

Thanks I'm going for the lot.

When I click on the flash sale the prices are the same as usual.

Are the HD packs worth the money ?

How do I get the 30% off ?

Thanks for the advice, I've noticed that with drums.

I'll get a great sound on their own but with the other instruments mixed in they sound awful so i've wasted my time.

Thanks Alex there's so much to these Pods i'm still eq-ing and tweaking wondering if i'll ever play the guitar again.

I think i've become OCD on the tone front

I'll try your suggestions and see what gives.

I have a 1974 Tele' and haven't done anything to it. I'm not sure which type of pot's etc Fender fitted then

I notice watching these guys on Youtube that they really are soft in their attack on the strings.

Another example is Jeff beck who seems to have his amp that high in volume he virtually just touches the strings when plucking.

Maybe i'll raid the laundry for a special towel !

I agree about the Pod HD and the older Pod sounding different. Even the Pod v2 with the original Line 6 logo and the later one sounded different.

This is why i've ended up with a floor full of modelers, i have,

Pod v2 ver 2.1

Pod v2 ver 2.3

Vox Tonelab

Behringer V-Amp 3

Pod HD Bean.

I'm still grappling with the Bean as there are so many parameters to change.

Also if you turn your speakers or amplifier right up loud you can hear a difference in the AIR of each modeler.

On my Les Paul Trad' the neck pick up is very low (almost inside the guitar body).

+1 for the above suggestion the check the input impedance on the Pod and the dual input settings

Thanks i'll try these suggestions.

Apologies for the extra r.

Thanks for the input guys i think my week end will be taken up mostly trying to get that sound.

Not sure about the towel and beer though.